< Back to the Main Site
« previous next »
Pages: [1]   Go Down

Author Topic: Reloading 5.56  (Read 2244 times)

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Reloading 5.56
« on: June 06, 2014, 12:39:46 PM »
Probably a dumb question, but my only reloading experience is with 9mm. 

I bought a bunch of 5.56 plinking ammo.  Is there any reason it can not be reloaded?  I have a Wylde chamber on my gun so I can shoot either .223 or 5.56, but of course the 5.56 is pretty cheap at times. 

A couple of follow up questions.  Can the 5.56 case be resized to the .223? Is the 5.56 case generally thicker due to being loaded to higher pressures than the .223?

Thanks,
Fly
Logged
Si vis pacem, para bellum

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Reloading 5.56
« Reply #1 on: June 06, 2014, 12:52:22 PM »
I think 5.56 brass is slightly thicker walled and has a little less case capacity, but it's all reloadable on the same equipment.  I've reloaded many, many rounds of 5.56 brass.
Logged

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Reloading 5.56
« Reply #2 on: June 06, 2014, 12:55:20 PM »
Awesome!  Thanks.

Fly



Sent from my iPhone using Tapatalk
Logged
Si vis pacem, para bellum

Offline tstuart34

  • NFOA Full Member
  • **
  • Join Date: Oct 2013
  • Location: Lincoln
  • Posts: 885
Re: Reloading 5.56
« Reply #3 on: June 06, 2014, 01:16:02 PM »
Depending on what type of brass you are running 556 needs to have the crimps removed from the primer pockets.
Logged

Offline MHicks

  • Forum Member
  • *
  • Join Date: Feb 2014
  • Posts: 28
Re: Reloading 5.56
« Reply #4 on: June 06, 2014, 01:25:19 PM »
Do a google search for 6mmbr.  They have a section for 223/5.56 that is extremely informative.  Not just about the chambers but a lot of other reloading questions you may find out you have later on.  IIRC the section is on the left side of their page.
Logged

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Reloading 5.56
« Reply #5 on: June 06, 2014, 01:56:33 PM »
Quote from: tstuart34 on June 06, 2014, 01:16:02 PM
Depending on what type of brass you are running 556 needs to have the crimps removed from the primer pockets.

Good point, I forgot about that.
Logged

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Reloading 5.56
« Reply #6 on: June 06, 2014, 03:14:57 PM »
Quote from: tstuart34 on June 06, 2014, 01:16:02 PM
Depending on what type of brass you are running 556 needs to have the crimps removed from the primer pockets.

Is that something which is visible from base (outside) or inside the case?

Fly
Logged
Si vis pacem, para bellum

Offline tstuart34

  • NFOA Full Member
  • **
  • Join Date: Oct 2013
  • Location: Lincoln
  • Posts: 885
Re: Reloading 5.56
« Reply #7 on: June 06, 2014, 03:18:56 PM »
Yes normally it is. If you have any mil surplus or lake city brass more then likely it is crimped.

Logged

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Reloading 5.56
« Reply #8 on: June 06, 2014, 03:21:05 PM »
Quote from: tstuart34 on June 06, 2014, 03:18:56 PM
Yes normally it is. If you have any mil surplus or lake city brass more then likely it is crimped.

Hmmm...not sure what I'm looking for in that photo.  They look awfully similar.  Is the primer pocket on the non-crimped just slight rounded when compared to the crimped?

Thanks,
Fly
Logged
Si vis pacem, para bellum

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Reloading 5.56
« Reply #9 on: June 06, 2014, 03:21:54 PM »
It almost looks like the crimped has a ring (for lack of a better description) around the primer.

Fly
Logged
Si vis pacem, para bellum

Offline tstuart34

  • NFOA Full Member
  • **
  • Join Date: Oct 2013
  • Location: Lincoln
  • Posts: 885
Re: Reloading 5.56
« Reply #10 on: June 06, 2014, 03:23:29 PM »
Sorry yes it is the ring around the primer. You can push out the spend primer but getting a new one in is a no go...
Logged

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Reloading 5.56
« Reply #11 on: June 06, 2014, 03:24:21 PM »
Quote from: tstuart34 on June 06, 2014, 03:23:29 PM
Sorry yes it is the ring around the primer. You can push out the spend primer but getting a new one in is a no go...

Roger that.  Thanks.

Fly
Logged
Si vis pacem, para bellum
Pages: [1]   Go Up
« previous next »