< Back to the Main Site

Author Topic: Weld a .22 on top of a .410, cut it down to one foot...  (Read 1821 times)

Offline rluening

  • NFOA Full Member
  • **
  • Join Date: Dec 2008
  • Posts: 123
Weld a .22 on top of a .410, cut it down to one foot...
« on: April 02, 2010, 02:44:27 PM »
... and you are "heavily armed"

http://www.wowt.com/home/headlines/89783977.html

Quote
A search of the residence located a Stevens .22/.410 single-shot over and under rifle/shotgun. It measured well under the legal limit, the barrel just over 12 inches and the overall length just under 19 inches.

/rl

Offline Dan W

  • NFOA Co-Founder
  • *****
  • Join Date: Oct 2007
  • Location: Lincoln NE
  • Posts: 8143
Re: Weld a .22 on top of a .410, cut it down to one foot...
« Reply #1 on: April 02, 2010, 05:14:14 PM »
The fact that the owner was already a  convicted felon in possession of a firearm would be important to note
Dan W    NFOA Co Founder
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.   J. F. K.

Offline FarmerRick

  • NFOA Co-Founder
  • *****
  • Join Date: Mar 2008
  • Location: Valley, NE
  • Posts: 3250
  • Antagonist of liberals, anti-hunters & hoplophobes
Re: Weld a .22 on top of a .410, cut it down to one foot...
« Reply #2 on: April 02, 2010, 07:00:09 PM »
I've been looking for one of those Stevens model 24's in .22LR/20 gauge for a few years now.  They're expensive when you can find them.

Here's an example of the one in the story, pre-modification.



« Last Edit: April 02, 2010, 07:07:22 PM by FarmerRick »
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.

partsman

  • Guest
Re: Weld a .22 on top of a .410, cut it down to one foot...
« Reply #3 on: April 06, 2010, 12:43:51 PM »
I have one of those over-unders.  It only cost $45.00 new in the box.  Really!  Bought it in Rawlins, Wyoming.-----in about 1959.  Nice dove gun.

partsman

  • Guest
Re: Weld a .22 on top of a .410, cut it down to one foot...
« Reply #4 on: April 07, 2010, 01:43:37 PM »
P.S. the one you are showing is way newer than mine.  Mine has the barrel selector on the side, not the hammer.

Offline FarmerRick

  • NFOA Co-Founder
  • *****
  • Join Date: Mar 2008
  • Location: Valley, NE
  • Posts: 3250
  • Antagonist of liberals, anti-hunters & hoplophobes
Re: Weld a .22 on top of a .410, cut it down to one foot...
« Reply #5 on: April 07, 2010, 03:15:47 PM »
I have one of those over-unders.  It only cost $45.00 new in the box.  Really!  Bought it in Rawlins, Wyoming.-----in about 1959.  Nice dove gun.

You just let me know if you want to double your investment... ;)

 ;D
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.

partsman

  • Guest
Re: Weld a .22 on top of a .410, cut it down to one foot...
« Reply #6 on: April 08, 2010, 02:59:40 PM »
I have one of those over-unders.  It only cost $45.00 new in the box.  Really!  Bought it in Rawlins, Wyoming.-----in about 1959.  Nice dove gun.

You just let me know if you want to double your investment... ;)

 ;D

Not on your sweet little tin type.  I got grand kids.

Offline Hardwood83

  • Powder Benefactor
  • *
  • Join Date: Aug 2009
  • Location: West Omaha
  • Posts: 447
  • Molon Labe
Re: Weld a .22 on top of a .410, cut it down to one foot...
« Reply #7 on: April 08, 2010, 05:31:22 PM »
... and you are "heavily armed"

http://www.wowt.com/home/headlines/89783977.html

Quote
A search of the residence located a Stevens .22/.410 single-shot over and under rifle/shotgun. It measured well under the legal limit, the barrel just over 12 inches and the overall length just under 19 inches.

If possession of an antique single shot .22/.410 qualifies as 'heavily-armed' I know some people with an absolute arsenal then.
"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud