Ammunition & Hand Loading > Cartridge and Shotshell reloading

Copper Plating

<< < (6/49) > >>

unfy:
kozball: yup, looks like air agitation will be just fine.  have a friend that does the reverse (stripping instead of plating).  i have spare aquarium air pumps for that :D

----

I'll be adding some vinegar to the solution tonight.  Need to work out numbers for how much.

----

A neato and handy document for those doing their own research:

http://ixian.ca/gallery/albums/pics_documents/Copper_Plating.pdf

Dan W:
I would be curious to see the surface of a commercially plated bullet under your microscope

unfy:
Went to walmart, bought the under $10 single air channel air pump thing, some tubing, lemon juice, non-iodized salt, and vinegar.

will be posting more in a bit :).

----

Dan: I'll bring a berry's bullet to work tomorrow and take some pics.  I'll also bring whatever i plate tonight.

----

edit: was single channel, not dual channel.  with holes poked in tubing with hot needle, single channel doesnt seem to push enough air like i want. it's agitating, but not great.

unfy:


brushed, 5min lemon juice + salt pickle, rinse, acetone 5min, rinse, plating for 20min on a C cell.

140.3 grains start -> 140.7 grains finish

start size: .401 -> .4015 to .4025

coating is fairly smooth.

---



The bullet on the left is the one above, the one on the right was in the tank for 40min on the C cell.

It added 1.4 grains of copper, but came out .4020 to .4030 depending on positioning.

It's also got a slightly rougher finish.

Berry's does between... I think 0.003 of an inch up to 0.008 ?  I'm still approximately 0.0015 - 0.0020ish, so i need to nearly double my plating thickness to get to where berry's is.

I'll take these to work tomorrow to see how they look under scope (along with a berry's).

---

I can't scratch either with my fingernail.

unfy:


Left to right: berry 125gr 38, 20min, 40min from last night (both 140gr 10mm)

these were in my pocket for the morning.

although the noses look dark, i believe that's just dirt / etc.... closer inspection seems still shows a copper look.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version