Ammunition & Hand Loading > Cartridge and Shotshell reloading
Research on Reloading 9mm
SemperFiGuy:
dkarp:
DigiScales are fine. Some are expensive. Depends.
What some folks do to cope w/oscillations on balance beam scales while weighing is immediately manually move the pointer to the zero point. Release. Beam will either stay centered to indicate OK, or move up/down, indicating need for action.
RCBS claims that their magnet-dampened balance beam scale pointer doesn't oscillate. Does. Just not so much/long as undampened beam scales.
Good luck.
sfg
jonm:
titegroup is a good powder for 9mm. It uses very little powder in a 9mm charge but a double charge is easily seen as long as you are looking down into the case while setting the bullet on top.
One thing to note, titegroup burns hot. If you are shooting lead bullets, the smoke after 5-6 shots will make your target disappear at an indoor range.
unfy:
--- Quote from: SemperFiGuy on January 03, 2013, 12:14:55 PM ---DigiScales are fine. Some are expensive. Depends.
--- End quote ---
I've got a Mec little digital scale. Works just fine, and like any digital scale has a 'tear' function.
Place primed uncharged case on scale.
Press 'tear'.
Charge case.
Place case back on scale. Read out will be how much powder is in it.
EZPZ :)
Navigation
[0] Message Index
[*] Previous page
Go to full version