< Back to the Main Site
« previous next »
Pages: [1]   Go Down

Author Topic: Laser Engraving  (Read 5465 times)

Offline sjwsti

  • NFOA Full Member
  • **
  • Join Date: Oct 2009
  • Posts: 541
Laser Engraving
« on: June 19, 2012, 10:30:21 AM »
Ive got a buddy in west Omaha who invested in a laser engraving machine hoping to make a little extra cash in retirement. I brought over a few items for him to practice on, one being this AK stock. He engraved the Arabic lettering for "Infidel" on the right side. I then filled, sanded and refinished it. Didnt turn out too bad for a first attempt at this.









- Shawn
Logged
"It's not what you know that will get you into trouble; it's what you know that isn't true"

www.88tactical.com

Offline gsd

  • 2013 NFOA Firearm Rights Champion award winner
  • NFOA Full Member
  • **
  • Join Date: Oct 2010
  • Location: Lincoln, NE
  • Posts: 1831
Re: Laser Engraving
« Reply #1 on: June 19, 2012, 11:05:38 AM »
Looks good, any idea on what his rates may be?
Logged
It is highly likely the above post may offend you. I'm fine with that.

Offline jonm

  • Forum Member
  • *
  • Join Date: Apr 2012
  • Posts: 273
Re: Laser Engraving
« Reply #2 on: June 19, 2012, 11:24:20 AM »
Quote from: gsd on June 19, 2012, 11:05:38 AM
Looks good, any idea on what his rates may be?

X2. I need my receiver engraved before my SBR paperwork comes back.
Logged

Offline sjwsti

  • NFOA Full Member
  • **
  • Join Date: Oct 2009
  • Posts: 541
Re: Laser Engraving
« Reply #3 on: June 19, 2012, 12:15:16 PM »
If you go to http://1shotlaserengraving.com/ he has his contact info listed. He will get right back to you, like I said he is retired and doesnt have anything better to do. His rates are very reasonable and he is local (Omaha).

- Shawn
Logged
"It's not what you know that will get you into trouble; it's what you know that isn't true"

www.88tactical.com

Offline gsd

  • 2013 NFOA Firearm Rights Champion award winner
  • NFOA Full Member
  • **
  • Join Date: Oct 2010
  • Location: Lincoln, NE
  • Posts: 1831
Re: Laser Engraving
« Reply #4 on: June 19, 2012, 12:47:50 PM »
Excellent! I have a set of 1911 grips and a damascus knife coming to me soon, thinking a matched engraving set may be in order.
Logged
It is highly likely the above post may offend you. I'm fine with that.

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Laser Engraving
« Reply #5 on: June 19, 2012, 12:59:56 PM »
Does anyone know if laser engraving is deep enough for NFA purposes?  I think it has to be .003" deep.  I have a couple stamps which should be here any day so I am very interested.
« Last Edit: June 19, 2012, 01:02:12 PM by bkoenig »
Logged

Offline sjwsti

  • NFOA Full Member
  • **
  • Join Date: Oct 2009
  • Posts: 541
Re: Laser Engraving
« Reply #6 on: June 19, 2012, 01:39:25 PM »
 
Quote from: bkoenig on June 19, 2012, 12:59:56 PM
Does anyone know if laser engraving is deep enough for NFA purposes?  I think it has to be .003" deep.  I have a couple stamps which should be here any day so I am very interested.

I just got off of the phone with Mike about the NFA stuff. He cant engrave recievers to NFA standards. He explained that his machine will etch metal but wont engrave it.  :(

- Shawn
Logged
"It's not what you know that will get you into trouble; it's what you know that isn't true"

www.88tactical.com

Offline jonm

  • Forum Member
  • *
  • Join Date: Apr 2012
  • Posts: 273
Re: Laser Engraving
« Reply #7 on: June 19, 2012, 03:39:30 PM »
Quote from: bkoenig on June 19, 2012, 12:59:56 PM
Does anyone know if laser engraving is deep enough for NFA purposes?  I think it has to be .003" deep.  I have a couple stamps which should be here any day so I am very interested.
apparently this one isnt but others can. You change the pulse so that it sits on one spot longer and it engraves it deeper.
Logged

Offline dukduk

  • Powder Benefactor
  • *
  • Join Date: Aug 2011
  • Posts: 124
Re: Laser Engraving
« Reply #8 on: September 21, 2012, 08:29:03 PM »
what's the guy's info?
Logged

Offline sjwsti

  • NFOA Full Member
  • **
  • Join Date: Oct 2009
  • Posts: 541
Re: Laser Engraving
« Reply #9 on: September 22, 2012, 08:39:27 AM »
Quote from: sjwsti on June 19, 2012, 12:15:16 PM
If you go to http://1shotlaserengraving.com/ he has his contact info listed. He will get right back to you, like I said he is retired and doesnt have anything better to do. His rates are very reasonable and he is local (Omaha).

Here are a couple more pics of his work.



Logged
"It's not what you know that will get you into trouble; it's what you know that isn't true"

www.88tactical.com

Offline dukduk

  • Powder Benefactor
  • *
  • Join Date: Aug 2011
  • Posts: 124
Re: Laser Engraving
« Reply #10 on: September 22, 2012, 12:33:55 PM »
Thanks, I'll check it out

just in case people are curious:
I wanted to have him burn the arc show around the safety hole in my AR, like the pictogram. And maybe trace out the FIRE or even a red rectangle. I have a 45 degree safety and as is, the selector does not point to FIRE. Looking to get it all burned in RED. Thanks again will post pics after
Logged

Offline dukduk

  • Powder Benefactor
  • *
  • Join Date: Aug 2011
  • Posts: 124
Re: Laser Engraving
« Reply #11 on: September 26, 2012, 09:17:30 PM »
website contact function not working
Logged

Offline Randy

  • NFOA Co-Founder
  • *****
  • Join Date: Nov 2007
  • Location: Plattsmouth, NE
  • Posts: 908
  • "Liberty or Death"---------"Don't Tread on Me!"
Re: Laser Engraving
« Reply #12 on: September 26, 2012, 10:50:40 PM »
Worked just fine for myself. Using IE 9
Logged
Let us never forget 9.11.01
 "She Never Begins An Attack, Nor When Once Engaged, Ever Surrenders:"
An American Guesser Oct.3, 1775

Offline dukduk

  • Powder Benefactor
  • *
  • Join Date: Aug 2011
  • Posts: 124
Re: Laser Engraving
« Reply #13 on: September 27, 2012, 10:33:10 PM »
strange, is he taking work?
Logged

Offline dukduk

  • Powder Benefactor
  • *
  • Join Date: Aug 2011
  • Posts: 124
Re: Laser Engraving
« Reply #14 on: October 05, 2012, 02:48:28 PM »


even better than what I could think of or copy

« Last Edit: October 07, 2012, 07:59:32 PM by dukduk »
Logged
Pages: [1]   Go Up
« previous next »