< Back to the Main Site

Author Topic: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"  (Read 3481 times)

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
I built a 2.5' x 2' table so my sonic cleaner would have a place to sit next to the utility sink.  Because the top of the table is only plywood, I was looking for a dense rubber mat (1/4"-1/2") that could cover the table top.  A few criteria for the mat...

1) Must be firm and not a springy rubber.  Not looking for cushioning, just durability, liquid proof, and a solid platform to support my sonic cleaner and various other items.

2) Must be a solid piece so spills will not get to the plywood table top.

3) Black preferred but would consider other colors.

4) I don't want to spend $60 for a 3' x 6' piece that I am only going to use a small portion of.

5) Prefer close to Lincoln.

Anyone have an idea where I could get such a thing?  I was hoping someone might have a scrap piece and/or know where I could find something that meets my specifications without breaking the bank.

Thanks,
Fly
Si vis pacem, para bellum

Offline Dan W

  • NFOA Co-Founder
  • *****
  • Join Date: Oct 2007
  • Location: Lincoln NE
  • Posts: 8143
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #1 on: August 10, 2013, 09:33:56 PM »
Why don't you just spray the top with some bedliner
Dan W    NFOA Co Founder
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.   J. F. K.

Offline gsd

  • 2013 NFOA Firearm Rights Champion award winner
  • NFOA Full Member
  • **
  • Join Date: Oct 2010
  • Location: Lincoln, NE
  • Posts: 1831
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #2 on: August 10, 2013, 09:35:16 PM »
Honestly? Wal-Mart. Look in the automotive section for a set of the floormats for the backseats. usually you can get a set for around $10.
It is highly likely the above post may offend you. I'm fine with that.

Offline shooter

  • NFOA Full Member
  • **
  • Join Date: Aug 2013
  • Location: near Yutan
  • Posts: 1630
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #3 on: August 10, 2013, 09:35:35 PM »
 get a mud flap for a big truck
Was mich nicht umbringt macht mich stärker
Sic semper evello mortem tyrannis
 NRA Endowment member
  Shoot  them in the crotch.  Clint Smith, thunder ranch.  Oct 14, 2016

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #4 on: August 10, 2013, 10:02:00 PM »
Why don't you just spray the top with some bedliner

That is a definite possibility.

Thanks!
Fly

Honestly? Wal-Mart. Look in the automotive section for a set of the floormats for the backseats. usually you can get a set for around $10.

Not sure if that will be the thickness I am looking for, but I will check it out. 

Thanks!
Fly

get a mud flap for a big truck

Hmmmm...looked at some online and they are 1/4"-1/2" thick and the right dimensions.  I definitely will consider this too. 

Thanks!
Fly
Si vis pacem, para bellum

Offline AWick

  • Steel Benefactor
  • *
  • Join Date: Jun 2013
  • Location: West Millard
  • Posts: 350
  • Home is where your armory is.
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #5 on: August 10, 2013, 10:58:40 PM »
"Well-regulated" meant well equipped, trained and disciplined... not controlled with an iron fist.

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #6 on: August 11, 2013, 11:21:15 PM »
Might as well be patriotic in the process...

http://www.iowa80.com/DirectionsWEB/webcart_productDisplay.php?itemid=87561
I like it, but...
  • I would feel bad when I spilled crap all over it.
  • It is a little pricey compared to the basic mud flaps.
  • Sadly, it is probably made in China.  :(
That gives me an idea though.  I was wondering what kind of banners I could hang on the wall of my man cave.  What would be more appropriate than the American flag (made in America of course)?

Fly
Si vis pacem, para bellum

Offline Hank

  • Lead Benefactor
  • **
  • Join Date: Mar 2013
  • Posts: 186
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #7 on: August 13, 2013, 09:03:00 PM »
get a mud flap for a big truck
This was my first thought and I just happen to have one that might work.
I will try to measure it and post a picture tomorrow.
I`m not sure if it will work because of the writing on it(not totally flat).

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #8 on: August 13, 2013, 10:41:50 PM »
This was my first thought and I just happen to have one that might work.
I will try to measure it and post a picture tomorrow.
I`m not sure if it will work because of the writing on it(not totally flat).

Hmmm...are you in (or close to) Lincoln?  Can it be flipped over to a flat/unmarked side?

Let me know.

Thanks,
Fly
Si vis pacem, para bellum

Offline Hank

  • Lead Benefactor
  • **
  • Join Date: Mar 2013
  • Posts: 186
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #9 on: August 14, 2013, 06:39:45 PM »
Hmmm...are you in (or close to) Lincoln?  Can it be flipped over to a flat/unmarked side?

Let me know.

Thanks,
Fly
Nebraska City (about 45minute drive East)
I went and fetched it from out back (I just recently tossed it outside of my workshop), and it measures 24" X 30"  and ~5/16" thick.
I would post a picture but the wife took SD card to wallymart to develop vacation pictures.
I believe it might work good for you and you are welcome to have it.
I think we (or wife at least) is headed to walmart hwy 2 to pick up daughters eyeglasses tomorrow if we can work it out to meet there.
There is some slight rust stain on one end on the back (flat) side but belive it could be wire brushed off maybe.
ETA- PM sent
« Last Edit: August 14, 2013, 06:52:24 PM by Hank »

Offline Gary

  • NFOA Full Member
  • **
  • Join Date: Feb 2013
  • Location: Lincoln
  • Posts: 1199
    • Guns 2 Roses
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #10 on: August 15, 2013, 02:06:55 AM »
TSC  Horse stall mat.  $30 or so, depending on if it is on sale or not.  4' x 6'  and really thick.   Cut to fit. 

Offline 358156hp

  • Forum Member
  • *
  • Join Date: May 2013
  • Posts: 23
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #11 on: August 18, 2013, 12:33:24 PM »
Go to your nearest Walmart and look at rubber door mats, the type for your house. You're bound to find something affordable.

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Needed: Rubber mat for my reloading "Sonic Cleaner Wet Station"
« Reply #12 on: August 18, 2013, 02:51:47 PM »
Thanks to all for the suggestions. Hank hooked me up with a mud flap and it is the exact dimensions I need.

Thanks again Hank.

Fly
Si vis pacem, para bellum