NFOA MEMBERS FORUM

General Categories => The NFA Corner => Topic started by: RobertH on March 23, 2012, 08:31:37 AM

Title: Form 1 approved! (updated with pics)
Post by: RobertH on March 23, 2012, 08:31:37 AM

finally got my Form 1 back.  203 days door to door.  if you're going to put in a form, do it NOW!

Title: Re: Form 1 approved!
Post by: Wildgoose on March 30, 2012, 08:44:37 PM

I actually read this back when you posted it and forgot to give you a big Congratulations! ;D I am still a long way off on the one I sent in Feb. Wish I had gotten off the fence last summer but at least its in the que now. Should have it back before the election anyway. ::) 

Title: Re: Form 1 approved!
Post by: RobertH on March 30, 2012, 09:29:19 PM

i have a spare lower with a stock and a few uppers, just sitting in my safe taking up room, but i don't know if i really "need" two SBR's.  even though two are better than one.

Title: Re: Form 1 approved!
Post by: Wildgoose on March 31, 2012, 07:05:57 AM

Robert,
I am going to have to have this next SBR engraved. I did my first one myself and to be honest was not pleased with the results. It filled the requirement but looks  more Romanian than Bulgarian if you know what I mean. :laugh: Did you have yours done and if so who did you go to?
Thanks
Goose

Title: Re: Form 1 approved!
Post by: RobertH on March 31, 2012, 11:50:09 AM

i got mine engraved with Ident in TX.  there's a post about me using the NFOA logo for my engraving.  i think it looks pretty cool.

http://nebraskafirearms.org/forum/index.php/topic,4359.msg31707.html#msg31707 (http://nebraskafirearms.org/forum/index.php/topic,4359.msg31707.html#msg31707)

Title: Re: Form 1 approved!
Post by: RobertH on September 09, 2012, 09:40:33 AM

i know im digging up an old thread, but here's an update anyway.... with pictures!

PSA lower w/ Stag Arms LPK
PSA & Spikes Tactical blem'd uppers
Magpul MOE furniture and BUIS, grips, mags, etc


SBR in .223/5.56:
10.5" 1/7 barrel, shortened by ADCO, bought off AR15.com's EE
Tareinco OD green sling
Vortex Strikefire optic
(http://i53.photobucket.com/albums/g50/rchaisch/DSCN4118.jpg)


SBR in .300 BLK:
9" 1/8 Shilen barrel custom made by Ole's Gun Shop
YHM free float rail
(http://i53.photobucket.com/albums/g50/rchaisch/DSCN4115.jpg)

SBR in 22LR:
6.5" 1/16 CMMG barrel w/ CMMG SS kit
UTG Pro free float rail
Bushnell red dot sight
(this will be my coon killing machine this fall during the fur season)
(http://i53.photobucket.com/albums/g50/rchaisch/DSCN4113.jpg)


there's a few other things i need before i'm done... like a 22 thread protector, optic for 300BLK, charging handle and BCG for 300BLK... the list goes on.  i also need to color fill in the engravings on the lower.  that is a winter job.

BIG THANKS
Brian K - great help!  always knowledgeable and helped where and when i needed it!  and he had all the tools so i didn't need to buy them!
Rod Moeller aka Moeller Arms - i bought a lot of stuff at his store..... great guy!
DE GUNS - bought stuff there too.  mostly mags and ammo, stuff not pictured.

Title: Re: Form 1 approved! (updated with pics)
Post by: bkoenig on September 09, 2012, 09:30:23 PM

If your .22 SBR runs like mine you're going to put a LOT of rounds through that thing.  I bet my .22 upper has 10x the round count of any other gun I own.  Hands down the most fun gun I own.  The only way to make it better would be if it had a happy switch.

Now you REALLY need a .22 can.....

Title: Re: Form 1 approved! (updated with pics)
Post by: RobertH on September 10, 2012, 11:28:25 AM

i went to Thunder Alley to sight in the scope and found out the CMMG action does NOT like and will not shoot Winchester Wildcat 22 ammo.  it works fine in other long guns and pistols, but i had more FTF than anything else, but my other ammo worked fine.  it was super fun (and accurate) and yes a 22 suppressor is on my short list.

now if they where only $5 stamps......