< Back to the Main Site

Author Topic: .223 ft/lbs at 100 yards.. how to calculate?  (Read 13122 times)

Offline Burnsy87

  • NFOA Full Member
  • **
  • Join Date: Mar 2009
  • Location: Omaha, NE
  • Posts: 176
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #20 on: December 30, 2014, 06:29:58 PM »
Fair enough.  I just would prefer 70gr.

Offline SS_N_NE

  • NFOA Full Member
  • **
  • Join Date: Feb 2012
  • Posts: 429
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #21 on: December 30, 2014, 07:53:50 PM »
Since the Ft/Lb @ 100 yards is generally a hunting requirement in NE. I am going to ask...how does the DNR decide?

For instance...you are hunting with your AR....stopped by DNR...you show them the box your ammo came from...how do they deside you have the proper ammo to make the foot/pounds?

Offline Burnsy87

  • NFOA Full Member
  • **
  • Join Date: Mar 2009
  • Location: Omaha, NE
  • Posts: 176
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #22 on: December 30, 2014, 11:04:33 PM »
^ Yeah that's a good question

Offline tstuart34

  • NFOA Full Member
  • **
  • Join Date: Oct 2013
  • Location: Lincoln
  • Posts: 885
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #23 on: January 01, 2015, 08:30:08 AM »
I would say you wouldn't get picked up for this unless your have a mall cop dnr guy or they are stacking charges on you.....

If they wanted to question your loads they would have to do the same method as we are disscusing. Set a crono have you shoot through it and calculate it out. There are way to many variables just base things off of calculations of boxed ammo. Barrel material, rifling, and coatings all make a difference in velocity. 
« Last Edit: January 01, 2015, 08:35:50 AM by tstuart34 »

Offline SS_N_NE

  • NFOA Full Member
  • **
  • Join Date: Feb 2012
  • Posts: 429
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #24 on: January 01, 2015, 09:45:11 AM »
If they wanted to question your loads they would have to do the same method as we are disscusing.

That is basically what I was referring to with my questions. The DNR sets a regulation, but doesn't specify the method of verification. Most likely you could be charged and would have the burden of proof in your defense.  A classic case of too much law.

Offline jonm

  • Forum Member
  • *
  • Join Date: Apr 2012
  • Posts: 273
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #25 on: January 01, 2015, 10:40:55 AM »
That is basically what I was referring to with my questions. The DNR sets a regulation, but doesn't specify the method of verification. Most likely you could be charged and would have the burden of proof in your defense.  A classic case of too much law.
That's a lot of speculation.

Offline SS_N_NE

  • NFOA Full Member
  • **
  • Join Date: Feb 2012
  • Posts: 429
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #26 on: January 01, 2015, 09:02:08 PM »
That's a lot of speculation.

Can you show me how the DNR determines the ft/lb requirement is met in any given circumstance?

Offline jonm

  • Forum Member
  • *
  • Join Date: Apr 2012
  • Posts: 273
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #27 on: January 01, 2015, 10:27:22 PM »
I cannot. That's why Im not speculating.

Offline RobertH

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: Apr 2009
  • Location: Norfolk
  • Posts: 2489
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #28 on: January 01, 2015, 11:05:45 PM »
has anyone emailed or called them yet to find out?  im pretty sure they will be open tomorrow.
Follow the NFOA on Twitter: @NFOA_Official

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #29 on: January 02, 2015, 12:40:54 AM »
It looks like a job for "My Personal Radar".

http://mylabradar.com



Never have to set the chrono up, shoot at it (or in some cases actually shoot it), and then tear it down.  Get the muzzle velocity at any distance up to 100 yards.  Day, night, indoor, or outside. 

Fly
Si vis pacem, para bellum

Offline tstuart34

  • NFOA Full Member
  • **
  • Join Date: Oct 2013
  • Location: Lincoln
  • Posts: 885
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #30 on: January 02, 2015, 09:14:53 AM »
has anyone emailed or called them yet to find out?  im pretty sure they will be open tomorrow.

Just called NG&P and spoke with the law enforcement division. They said they DO NOT travel with cornos and as far as the gentlemen knew it would be handled on a case by case bases. He said he has never had encounter with a officer questioning the FT/LB reg. He said most of the time the specification is used to insure that people are using the proper caliber. 

Offline RobertH

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: Apr 2009
  • Location: Norfolk
  • Posts: 2489
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #31 on: January 02, 2015, 03:28:55 PM »
Just called NG&P and spoke with the law enforcement division. They said they DO NOT travel with cornos and as far as the gentlemen knew it would be handled on a case by case bases. He said he has never had encounter with a officer questioning the FT/LB reg. He said most of the time the specification is used to insure that people are using the proper caliber. 

thanks.  i was going to call, but forgot.  i figured as much.
Follow the NFOA on Twitter: @NFOA_Official

Offline Burnsy87

  • NFOA Full Member
  • **
  • Join Date: Mar 2009
  • Location: Omaha, NE
  • Posts: 176
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #32 on: November 26, 2016, 08:06:10 PM »
Bringing back from the dead, sorry admin/mods.

Came across https://billstclair.com/energy.html today.  Can anybody find serious discrepancies with the formula?

Offline Les

  • NFOA Full Member
  • **
  • Join Date: Apr 2012
  • Location: Lincoln
  • Posts: 1025
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #33 on: November 26, 2016, 08:38:33 PM »
Bringing back from the dead, sorry admin/mods.

Came across https://billstclair.com/energy.html today.  Can anybody find serious discrepancies with the formula?
[/
« Last Edit: November 26, 2016, 08:41:34 PM by Les »

Offline Burnsy87

  • NFOA Full Member
  • **
  • Join Date: Mar 2009
  • Location: Omaha, NE
  • Posts: 176
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #34 on: November 26, 2016, 08:41:59 PM »
Just screwing around.  Took 200 fps off, though that's not accurate, I don't know what Black Hills uses for a barrel length for their printed FPS.  But it gave me the required energy at 100, so I'm assuming it's a 24" barrel instead of 20" they use that I assumed.

Offline Les

  • NFOA Full Member
  • **
  • Join Date: Apr 2012
  • Location: Lincoln
  • Posts: 1025
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #35 on: November 26, 2016, 08:53:40 PM »
Agreed, most use 24" to test fps and calculate for Ft #'s  I'd probably use a 62-79 gr. soft point to hunt med game.  Should be no problem. 

Offline Burnsy87

  • NFOA Full Member
  • **
  • Join Date: Mar 2009
  • Location: Omaha, NE
  • Posts: 176
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #36 on: November 26, 2016, 08:57:25 PM »
Talked to Black Hills (through Facebook, of all things... blown away it worked, and they responded so quickly)

.223 is out of a 24" barrel
5.56 is out of a 20" barrel

According to that website, 5.56 62gr TSX is good to go.  I still want to chrono though.
« Last Edit: November 26, 2016, 09:02:46 PM by Burnsy87 »

Offline Mali

  • NFOA Full Member
  • **
  • Join Date: Jan 2013
  • Posts: 1718
  • My life, my rights.
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #37 on: November 26, 2016, 10:41:52 PM »
Talked to Black Hills (through Facebook, of all things... blown away it worked, and they responded so quickly)

.223 is out of a 24" barrel
5.56 is out of a 20" barrel

According to that website, 5.56 62gr TSX is good to go.  I still want to chrono though.

Interesting. Although I am still a neophyte with regard to the difference, I would not have thought they would have a 4" barrel difference. Can anybody with more knowledge explain that to me?
Thank you in advance.
Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same. - Ronald Reagan

Offline JAK

  • NFOA Full Member
  • **
  • Join Date: Jun 2014
  • Posts: 230
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #38 on: November 27, 2016, 06:55:39 AM »
My best guess is the difference between military and civilian ammo specifications.

From what I have seen/read the standard length barrel is used to test most civilian/commercial ammo is 24 inches for rifles.  This relates to the barrel length of most bolt action hunting rifles.

For military ammunition what is used is the barrel length of the standard service rifle which for years has been the M-16 with a 20 inch barrel.  Most of the reloading manuals that list the 5.56 separate from the .223 also state that a AR-15 with a 20 inch barrel was used for testing.

When the military orders ammo, it will specify a bullet weight and velocity for the ammo along with a minimum accuracy level and the weapon it is going to be fired from.  I have attached a couple of pages from military manuals that show this.

John K

Offline Mali

  • NFOA Full Member
  • **
  • Join Date: Jan 2013
  • Posts: 1718
  • My life, my rights.
Re: .223 ft/lbs at 100 yards.. how to calculate?
« Reply #39 on: November 27, 2016, 09:23:20 AM »
Your explanation certainly makes sense based on what I know from being around the military and friends who get to hunt. Thanks for the info.
Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same. - Ronald Reagan