< Back to the Main Site

Author Topic: Wylde Stallyn Build!  (Read 6346 times)

Offline shooter

  • NFOA Full Member
  • **
  • Join Date: Aug 2013
  • Location: near Yutan
  • Posts: 1630
Re: Wylde Stallyn Build!
« Reply #20 on: March 19, 2014, 10:49:51 AM »
MI also has a new Keymod if you like that type of stuff. My dad just put one on his blackout build. Looks nice but it I can see it being hard on fingers without gloves or rail sections...



   that key mod always looked like the poles on pallet racking to me,
Was mich nicht umbringt macht mich stärker
Sic semper evello mortem tyrannis
 NRA Endowment member
  Shoot  them in the crotch.  Clint Smith, thunder ranch.  Oct 14, 2016

Offline tstuart34

  • NFOA Full Member
  • **
  • Join Date: Oct 2013
  • Location: Lincoln
  • Posts: 885
Re: Wylde Stallyn Build!
« Reply #21 on: March 19, 2014, 12:51:09 PM »
   that key mod always looked like the poles on pallet racking to me,


Same concept...

Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: Wylde Stallyn Build!
« Reply #22 on: March 19, 2014, 08:29:38 PM »
Does the name of this thread mean you're a Brony?

Is there something you need to tell us?

 :o

Bill & Ted far pre-date "Bronyism".

Offline NE Bull

  • 2011 NFOA Firearm Rights Champion Award winner
  • NFOA Full Member
  • **
  • Join Date: Nov 2008
  • Location: Lincoln, NE
  • Posts: 3501
    • A "friend's" blog
Re: Wylde Stallyn Build!
« Reply #23 on: March 20, 2014, 08:35:56 AM »
I'm git a chuckle outta the thread title since my CB Handle (you'll have to Google it young grasshoppers) Back in the day was Wyld Stalyun.  And, why yes, I do still have the County Fair Hand Painted Custom Front License Plate to prove it.  (If ya ain't a Great Plains Hillbilly, ya ain't gonna understand)

But, I AM following along as I may just have to build me one of these, ya know for old times' sake and all.
“It is not an issue of being afraid, It's an issue of not being afraid to protect myself.”
 Omaha Mayor Jean Stothert
 "A gun is a tool, Marian; no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that."  Shane

Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: Wylde Stallyn Build!
« Reply #24 on: May 21, 2014, 03:39:47 PM »
This has been collecting dust for a while.  I've been too stinkin' busy working and training for the 24 Hour Sniper Adventure Challenge to do much with it, but I did order a LUTH-AR buttstock and A2 tube, spring and buffer today.

If you're not familiar with the LUTH-AR stock, it seems to be the up-and-coming, lightweight contender to take out the Magpul PRS.  Here's a pic.



I think I've decided on a Geissele SSA-E trigger.  Optics decision up next.

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Wylde Stallyn Build!
« Reply #25 on: May 21, 2014, 04:34:53 PM »
This has been collecting dust for a while.  I've been too stinkin' busy working and training for the 24 Hour Sniper Adventure Challenge to do much with it, but I did order a LUTH-AR buttstock and A2 tube, spring and buffer today.

If you're not familiar with the LUTH-AR stock, it seems to be the up-and-coming, lightweight contender to take out the Magpul PRS.  Here's a pic.



I think I've decided on a Geissele SSA-E trigger.  Optics decision up next.

Cool, I've been looking at that stock.  They're getting pretty popular with 3 gun shooters.

Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: Wylde Stallyn Build!
« Reply #26 on: May 21, 2014, 04:58:00 PM »
I've talked to a couple guys who are shooting them and they really like the fit, finish, quality and weight.

Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: Wylde Stallyn Build!
« Reply #27 on: May 24, 2014, 06:39:51 PM »
LUTH-AR stock showed up today ...







Did a little test fitting ...


Offline jonm

  • Forum Member
  • *
  • Join Date: Apr 2012
  • Posts: 273
Re: Wylde Stallyn Build!
« Reply #28 on: May 24, 2014, 07:28:23 PM »
That stock looks good.

Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: Wylde Stallyn Build!
« Reply #29 on: May 24, 2014, 08:30:48 PM »
That stock looks good.

Very light.  Quality appears to be excellent.  A great alternative to Magpul's PRS.

Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: Wylde Stallyn Build!
« Reply #30 on: December 07, 2014, 05:13:24 PM »
The Wylde Stallion is complete!  Specs updated in the original post.

« Last Edit: December 07, 2014, 05:18:03 PM by Mudinyeri »

Offline shooter

  • NFOA Full Member
  • **
  • Join Date: Aug 2013
  • Location: near Yutan
  • Posts: 1630
Re: Wylde Stallyn Build!
« Reply #31 on: December 07, 2014, 11:31:43 PM »
MI also has a new Keymod if you like that type of stuff. My dad just put one on his blackout build. Looks nice but it I can see it being hard on fingers without gloves or rail sections...



 it still looks like pallet racking to me!
Was mich nicht umbringt macht mich stärker
Sic semper evello mortem tyrannis
 NRA Endowment member
  Shoot  them in the crotch.  Clint Smith, thunder ranch.  Oct 14, 2016

Offline depserv

  • NFOA Full Member
  • **
  • Join Date: Oct 2011
  • Location: Omaha
  • Posts: 870
Re: Wylde Stallyn Build!
« Reply #32 on: December 15, 2014, 01:55:56 PM »
I got a competition Colt AR chambered in .223 Wylde for $699 from CDNN a few months back.  Seems to be a decent rifle as you would expect from Colt.  Except that it has no dust cover and no way to put one on without replacing the upper receiver.   

http://www.cdnnsports.com/colt-csr-1516-5-56-16-mid-wt-bbl-free-float-1-30.html#.VI88JGM5CUk
The liberal cult seeks destruction of the American Republic like water seeks low ground.

Offline Dan W

  • NFOA Co-Founder
  • *****
  • Join Date: Oct 2007
  • Location: Lincoln NE
  • Posts: 8143
Re: Wylde Stallyn Build!
« Reply #33 on: December 15, 2014, 02:18:15 PM »
Except that it has no dust cover and no way to put one on without replacing the upper receiver.   

 Typical of the "sporter" genre, no forward assist and no ejection port cover.

I eliminated the forward assist on my latest build and just used a Schuster FA plug in the hole
Dan W    NFOA Co Founder
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.   J. F. K.

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Wylde Stallyn Build!
« Reply #34 on: December 15, 2014, 04:14:23 PM »
I don't think I've ever used my forward assist, but I tell myself it's nice to have JIC.

Offline jonm

  • Forum Member
  • *
  • Join Date: Apr 2012
  • Posts: 273
Re: Wylde Stallyn Build!
« Reply #35 on: December 15, 2014, 05:30:08 PM »
Round doesn't go into the chamber? Just mash it in there harder. Makes sense.

Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: Wylde Stallyn Build!
« Reply #36 on: March 01, 2015, 01:53:55 PM »
The Stallyn is going through some changes: Diamondhead 10.25" hand guard, Liberty Torch QA suppressor, ACOG ...