< Back to the Main Site

Author Topic: How Do I Handle Chambering A Round For Concealed Carry  (Read 1721 times)

Offline Gary

  • NFOA Full Member
  • **
  • Join Date: Feb 2013
  • Location: Lincoln
  • Posts: 1199
    • Guns 2 Roses
How Do I Handle Chambering A Round For Concealed Carry
« on: April 25, 2014, 02:23:04 AM »
One must ask, why should anyone carry a Concealed Carry, or open carry sidearm?  Easy answer, is for protection.

Protection.  That means from all threats.  All threats.

What actions, might be taken, by the sidearm owner, that could make his use of a sidearm, a problem, rather than an asset?

The one problem, that comes up over and over, all across this country, is the recurrence of something called ND, or Negligent Discharge.

Simply put, the gun goes bang, before the gun owner was ready, or when the owner was not expecting a shot would be fired.   ND's result in property damage, Injury, and Loss Of Life. 

Hundreds of Police Officers, and many more hundreds of gun owners experience ND's in their daily lives, each year.   

The number one way to prevent an ND from happening, is follow a Gun Safety Protocol, and NEVER deviate from that.  NEVER.

For some people, that might be NEVER remove a handgun from a holster, unless you intend to unload it, or fire it.

Other people may follow the Big 3, or Big 4 Gun Safety Rules.  They feel, this will keep them safe.

Some people rely on certain types of guns, to increase their odds of carrying safely.  Long, hard trigger pulls, might be one example.

Some people, never carry a round in the chamber, until they are ready to shoot.

Some people, watch a few videos, dry fire a few hundred times, while watching a John Wayne movie, and figure it could never happen to them. 


How do I, personally, work at never having an ND?

I am big on Gun Safes.  Guns are locked up, when not on my person. 

I keep doors, windows locked.

I keep ammo separate from stored guns (except for a couple SHTF guns, I have locked up, to spring into action, if the need comes up quickly, allowing me to get to other guns, and stores of ammo)

My CC choice is Glock, with a few exceptions, reservations, and alterations.  I DO NOT, give my Glock's, trigger jobs.  A two pound trigger pull, on a Glock, is like leaning out a 8 story window, while standing on banana peals.  Not prudent, IMHO.  I leave factory Glocks, well enough alone, in the trigger department.  If Glock sells an internal component part, that is good enough for me.

One good thing about Glock, and one bad thing, is no external, manually applied safety.   It is good, because when you need your gun to go bang, all you have to do is pull the trigger, and if she has a round in the chamber, she goes bang.

The bad thing, is all you have to do is pull the trigger, and she goes bang.  It is a two sided coin, a two edge sward.

Reading owners manuals, safety manuals, you come away with the impression, do not chamber a round, as that can be dangerous.  Yes, that can be.

Dangerous also, having a gun, unloaded, and you need a loaded gun.  That sometimes, is also not prudent.

So how does one carry a Glock, loaded, fully loaded, and be safe from ND's?

Some say, a holster, with a covered trigger.

Others say, as level 2 holster, or level 3.  Sure, that does help.

I use a level 2 holster.

Is there anything that can be done, to ensure the gun, cannot be fired, in the times, I am loading the gun, or unloading the gun, and the Glock is out of the holster?

The answer to that , is 100% yes.

How does one do that?  Before any rounds go into my Glock 23C, I place on the gun, something called a Trigger Block Safety.  Installed,, takes a split second, the trigger cannot be depressed.  It can be removed in a split second, if need be.

First I place the Trigger Block Safety on my Glock, then I load my magazine in the gun, rack my slide, drop the magazine, top it back off, return the magazine to the gun, then place the gun, chambered round, magazine, into my level 2 holster, and I m ready to go. 

Unloading, all ammo, comes out of the gun, while the Trigger Block Safety is in the gun.

100% hard fast safety rule:  No ammo in the Glock, until after the Trigger Block Safety is installed. 

Following this safety rule, along with the NRA gun handling rules, I am confident, I have a pretty good chance of never having an ND in my lifetime.

Do I teach this to students in my CHP class?  No, I feel it is off the subject, and most students do not come to my class with a Glock.  I do offer a Glock class, where I teach what I know about Glocks, as a Glock Armorer, and in that class, I do let them try out a Trigger Block Safety.   I suggest my students, follow their Glock Owners manual, and follow that pretty close, and do academy level training, if they intend to carry with one live in the chamber, trigger block safety, or not.

 

Offline Gary

  • NFOA Full Member
  • **
  • Join Date: Feb 2013
  • Location: Lincoln
  • Posts: 1199
    • Guns 2 Roses
Re: How Do I Handle Chambering A Round For Concealed Carry
« Reply #1 on: April 25, 2014, 02:32:24 AM »
One safety concern I do not see mentioned very often, is don't get out several guns, all at once, and start messing with them.  You have a CHP, loaded gun, and you get out several other guns, to compare them, or switch mags, or compare sights, and .........etc. 

It only takes a split second to confuse this gun, for that gun, and you know that gun is not loaded, and BANG.

One gun at a time, at your desk, work bench, range shooting rest.   Two guns, is one too many.   One gun, it is much easier to keep straight what you are doing, and stay safe.

Offline David Hineline

  • NFOA Full Member
  • **
  • Join Date: Dec 2007
  • Location: South Sioux City
  • Posts: 562
Re: How Do I Handle Chambering A Round For Concealed Carry
« Reply #2 on: April 25, 2014, 03:08:38 AM »
That guy put his finger on the trigger 4 times before I quit watching and put his hand over the muzzle once.

I am not taking safety advice from him on any subject.
Machinegun owners blow thier load with one pull of the trigger

Offline Gary

  • NFOA Full Member
  • **
  • Join Date: Feb 2013
  • Location: Lincoln
  • Posts: 1199
    • Guns 2 Roses
Re: How Do I Handle Chambering A Round For Concealed Carry
« Reply #3 on: April 25, 2014, 12:14:49 PM »
This video, is not about firearms safety, it is a consumer, showing a product he purchased.  Frankly, I did not watch the video, I posted it so folks could see the product I was referring to.

Hickok45 has a video, where he cleans a handgun, while the magazine, he just removed from the gun, is on the cleaning table.

It is easy to find safety errors all over you tube, and in real day to day life.  The very reason, being extra careful, is critically important. 




Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: How Do I Handle Chambering A Round For Concealed Carry
« Reply #4 on: April 25, 2014, 12:37:08 PM »
One safety concern I do not see mentioned very often, is don't get out several guns, all at once, and start messing with them.  You have a CHP, loaded gun, and you get out several other guns, to compare them, or switch mags, or compare sights, and .........etc. 

It only takes a split second to confuse this gun, for that gun, and you know that gun is not loaded, and BANG.

One gun at a time, at your desk, work bench, range shooting rest.   Two guns, is one too many.   One gun, it is much easier to keep straight what you are doing, and stay safe.

That is why you treat every gun as if it was loaded.  In which case, it doesn't matter if you have one or one hundred guns out at the same time.

Offline Gary

  • NFOA Full Member
  • **
  • Join Date: Feb 2013
  • Location: Lincoln
  • Posts: 1199
    • Guns 2 Roses
Re: How Do I Handle Chambering A Round For Concealed Carry
« Reply #5 on: April 25, 2014, 02:21:17 PM »
Jugglers treat every juggling ball, as if they are juggling balls, but the degree of difficulty goes up, as you increase the number of balls.

I do think an armorer in a police station, can work on more than one gun at a time, but to suggest, a person new to shooting is just as prudent handling multiple tasks, over multiple guns, is not correct.

The introduction of a new gun, even to an experienced shooter, is pause to be more cautious.

When it comes to guns, I have no pride, no arrogance, no "my dog is taller, than your dog".

Safety, first, always. 

When it comes to guns, you can learn from the experiences of others, or you can say, I am OK, because that could never happen to me. 


Offline Mudinyeri

  • God, save us!
  • NFOA Full Member
  • **
  • Join Date: May 2010
  • Location: Omaha
  • Posts: 3965
  • Run for the Hills
Re: How Do I Handle Chambering A Round For Concealed Carry
« Reply #6 on: April 25, 2014, 03:01:54 PM »
When it comes to guns, you can learn from the experiences of others, or you can say, I am OK, because that could never happen to me.

If you treat EVERY gun as if it is loaded you will not have a negligent discharge because you won't be negligent.  If you never point a gun at anything you don't intend to destroy, even if you should have a negligent discharge it won't harm anything ... that you didn't want harmed.

Gun safety is simple.  Unfortunately, many people are lazy and stupid.

Offline docwithaglock

  • NFOA Full Member
  • **
  • Join Date: Jul 2013
  • Posts: 13
Re: How Do I Handle Chambering A Round For Concealed Carry
« Reply #7 on: April 25, 2014, 08:42:01 PM »
Safety begins between the ears.  If it's not there then any other things one does to supposedly be safe do not count.
Glock Ego Fedis Deo et Patriae