< Back to the Main Site

Author Topic: Midwest Leather Works holster  (Read 3306 times)

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Midwest Leather Works holster
« on: May 05, 2014, 05:23:54 PM »
Just wanted to show off my new holster from Matt at Midwest Leather Works.  I'm very impressed with the quality of workmanship and it's very comfortable.  This is his new tuckable IWB model.





This shot shows the rough side-in leather.  It helps with retention.  The double layer of leather helps keep it open when empty.  It is STIFF.  There's no way it's going to collapse on me.  I had no idea leather could be made that hard.  If I ever ran out of ammo I could beat the bad guy over the head with my holster.   ;D



I would highly recommend checking him out if you need a new holster.  The prices are very reasonable for this level of quality, plus he's a site sponsor.

Offline Gary

  • NFOA Full Member
  • **
  • Join Date: Feb 2013
  • Location: Lincoln
  • Posts: 1199
    • Guns 2 Roses
Re: Midwest Leather Works holster
« Reply #1 on: May 05, 2014, 06:02:10 PM »
I think leather is the way to go for long term comfort.  It seems kydex is harder than gun steel against my skin. 

Thanks for posting this. 

Offline abbafandr

  • Powder Benefactor
  • *
  • Join Date: Nov 2012
  • Location: Omaha
  • Posts: 891
Re: Midwest Leather Works holster
« Reply #2 on: May 05, 2014, 08:22:59 PM »
Nice holster.  Pretty decent CZ filling it :laugh:

Offline gsd

  • 2013 NFOA Firearm Rights Champion award winner
  • NFOA Full Member
  • **
  • Join Date: Oct 2010
  • Location: Lincoln, NE
  • Posts: 1831
Re: Midwest Leather Works holster
« Reply #3 on: May 05, 2014, 10:44:37 PM »
I keep telling people Matt does fine work. They don't believe me. Maybe they'll believe you.
It is highly likely the above post may offend you. I'm fine with that.

Offline Lmbass14

  • Powder Benefactor
  • *
  • Join Date: Mar 2011
  • Posts: 870
  • Red Horse - Semper Ducimus
Re: Midwest Leather Works holster
« Reply #4 on: May 06, 2014, 07:59:04 AM »
I'm a BIG Matt fan.  I've been pimpn' his work for a couple of years now and feel you get more than your money's worth, it's difinitely worth the wait.

Offline sparky

  • NFOA Full Member
  • **
  • Join Date: Jun 2010
  • Location: Omaha
  • Posts: 344
  • Site Sponsor
    • Midwest Leather Works
Re: Midwest Leather Works holster
« Reply #5 on: May 07, 2014, 01:50:47 PM »
Thanks guys I really appreciate the compliments and business!
www.midwestleatherworks.com
matt@midwestleatherworks.com

Offline Joe58

  • NFOA Full Member
  • **
  • Join Date: May 2014
  • Location: Madison
  • Posts: 6
Re: Midwest Leather Works holster
« Reply #6 on: June 05, 2014, 06:37:01 PM »
That is a nice looking holster. Do you find that the leather chafes your bare skin?

I've had firearms basically my entire life and finally decided to get my CCW and am going back and forth on what material the holster should be.

And I'd like to support Nebraska business if I can.

Thanks!

Joe

Offline Husker_Fan

  • NFOA Full Member
  • **
  • Join Date: Apr 2010
  • Location: Omaha
  • Posts: 717
Re: Midwest Leather Works holster
« Reply #7 on: June 05, 2014, 08:41:41 PM »
Thanks for reminding me that I need to get a belt from him.

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Midwest Leather Works holster
« Reply #8 on: June 05, 2014, 09:44:50 PM »
No, it doesn't chafe at all, but I also usually wear an undershirt.  Even against bare skin it's comfortable though.

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Midwest Leather Works holster
« Reply #9 on: June 05, 2014, 10:53:18 PM »
Nice holster.  Pretty decent CZ filling it :laugh:

CZ?! I thought that was the new Kilo Lima KL-2?

Fly
Si vis pacem, para bellum

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: Midwest Leather Works holster
« Reply #10 on: June 05, 2014, 11:00:41 PM »
Do you find that the leather chafes your bare skin?

I have carried with leather and kydex/plastic against my bare skin. My experience is that they will ALL start rubbing you the wrong way at the end of a long day. Brian is spot on. An undershirt is essential for the long term. If the holster contacted the same place on your skin all the time, it might stay comfortable. However, any holster is meant to hold the gun in a certain position, angle, and at the same place on (or inside) your belt. You and your skin on the other hand will be moving in all directions.

Just my humble opinion. Your mileage may vary.

Fly
Si vis pacem, para bellum

Offline JTH

  • NFOA Full Member
  • **
  • Join Date: Jan 2009
  • Posts: 2300
  • Shooter
    • Precision Response Training
Re: Midwest Leather Works holster
« Reply #11 on: June 06, 2014, 07:51:38 AM »
I have carried with leather and kydex/plastic against my bare skin. My experience is that they will ALL start rubbing you the wrong way at the end of a long day. Brian is spot on. An undershirt is essential for the long term.

This is interesting to me, because I've carried (in kydex) for quite some time (including 18-hour days, long-distance car rides, situations with lots of walking, etc) without chafe issues at all.  I've certainly had times when the holster dug into me, due to how I was sitting/crouching, but those were all temporary issues.

I can't recall a time when chafe was an issue.  Huh.

(And no, in the summers I don't wear an undershirt under the holster.)
Precision Response Training
http://precisionresponsetraining.com

Offline sparky

  • NFOA Full Member
  • **
  • Join Date: Jun 2010
  • Location: Omaha
  • Posts: 344
  • Site Sponsor
    • Midwest Leather Works
Re: Midwest Leather Works holster
« Reply #12 on: June 06, 2014, 08:28:45 AM »
I think that it also depends a lot on the individual.  How much do you sweat?  How sensitive of skin do you have and is it easily irritated?  Everybody will be somewhat different.
www.midwestleatherworks.com
matt@midwestleatherworks.com

Offline JimP

  • Steel Benefactor
  • *
  • Join Date: Oct 2007
  • Posts: 1310
Re: Midwest Leather Works holster
« Reply #13 on: June 06, 2014, 09:09:29 AM »
Quote
I keep telling people Matt does fine work. .

He does great work.  It's a pity his work has to be concealed most of the time.
The Right to Keep and BEAR Arms is enshrined explicitly in both our State and Federal Constitutions, yet most of us are afraid to actually excercise that Right, for very good reason: there is a good chance of being arrested........ and  THAT is a damned shame.  III.

Offline ILoveCats

  • NFOA Full Member
  • **
  • Join Date: Mar 2013
  • Posts: 802
Re: Midwest Leather Works holster
« Reply #14 on: June 06, 2014, 10:09:44 AM »
This is a good testimonial.  Might need to have you make a flap holster or two someday.  I love those for a revolver and good ones are increasingly hard to find.
"Absinthe makes the heart grow fonder." ~ FCK