< Back to the Main Site
« previous next »
Pages: [1]   Go Down

Author Topic: 1911 work... gunsmiths?  (Read 4118 times)

Offline Ry45

  • Forum Member
  • *
  • Join Date: Sep 2009
  • Posts: 9
1911 work... gunsmiths?
« on: January 07, 2010, 01:53:11 AM »
Hey fellas, I got a SA 1911 G.I. 45. When ever I shoot the thing I get wicked hammer bite pretty much every time due to my high grip. I love shooting it, but I don't shoot it as often as I'd like because of the bite.

So I was looking into some beaver-tails. From what i understand they don't just "drop in" and require some smith work.
Anybody know of a good smith that won't rip me off and do a good job?

Also any beaver-tail and hammer recommendations?
Logged

Offline Sotex

  • NFOA Full Member
  • **
  • Join Date: Jan 2009
  • Posts: 20
Re: 1911 work... gunsmiths?
« Reply #1 on: January 07, 2010, 07:12:20 AM »
Dude, if you live in NE and need work on a 1911, we have a nationally/internationally renowned gunsmith operation:

http://www.cylinder-slide.com/

If you are looking for a local dude, maybe someone else can help you out.
Logged

Offline Dan W

  • NFOA Co-Founder
  • *****
  • Join Date: Oct 2007
  • Location: Lincoln NE
  • Posts: 8143
Re: 1911 work... gunsmiths?
« Reply #2 on: January 07, 2010, 03:59:44 PM »
Cylinder and Slide is very good and very pricey.

Another option would be to look up Travis Frerking in Cortland NE,  just outside of Lincoln

http://www.fcwguns.com/
Logged
Dan W    NFOA Co Founder
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.   J. F. K.

Offline Ry45

  • Forum Member
  • *
  • Join Date: Sep 2009
  • Posts: 9
Re: 1911 work... gunsmiths?
« Reply #3 on: January 07, 2010, 06:44:20 PM »
Cool thanks for the tips... yeah I've known of cylinder and slide for a few years now. They are really pricey though.
I've heard they are usually swamped with so much gun work that its hard to get your gun back at a decent time (that's hearsay though...)

But I will look into it, thanks guys!
Logged

Offline FLUFF

  • Gun Show Volunteer
  • NFOA Full Member
  • **
  • Join Date: Apr 2009
  • Location: HASTINGS, NEBRASKA
  • Posts: 62
Re: 1911 work... gunsmiths?
« Reply #4 on: January 07, 2010, 07:43:14 PM »
I have been the Cylinder and Slide route.
 Yes it took a while, yes it was expensive,
but well worth the time and expense.

You don't rush quality and it don't come cheap

FLUFF
Logged

Offline SBarry

  • Former BOD, NFOA Volunteer , NFOA Firearm Rights Champion Award Winner
  • NFOA Full Member
  • **
  • Join Date: Apr 2009
  • Location: Kearney
  • Posts: 1107
Re: 1911 work... gunsmiths?
« Reply #5 on: January 07, 2010, 10:01:32 PM »
Don't forget Bob Marvel of Crete. He is a master smith also.
Logged
The sheep don't like this sheepdog until the wolves start working the flock.

Offline bullit

  • NFOA Full Member
  • **
  • Join Date: Feb 2009
  • Posts: 2143
Re: 1911 work... gunsmiths?
« Reply #6 on: January 08, 2010, 07:35:36 AM »
Mike Schlereth in Lincoln has worked on a couple of 1911s for me.  Been pleased with his work and price.
402-488-1551
Logged

Offline hillbilly

  • Forum Member
  • *
  • Join Date: Dec 2009
  • Posts: 2
Re: 1911 work... gunsmiths?
« Reply #7 on: January 09, 2010, 01:53:19 PM »
You can always check out the Wilson Combat site and look to see if they have drop in parts for your particular model.  I've used a number of their parts and the most I needed to do was a little file and stone work.  You can buy direct and it's pretty easy to do the work unless you are after a true custom fit.
Logged

Offline David Hineline

  • NFOA Full Member
  • **
  • Join Date: Dec 2007
  • Location: South Sioux City
  • Posts: 562
Re: 1911 work... gunsmiths?
« Reply #8 on: January 10, 2010, 04:22:52 AM »
I think there are products made to drop in.  http://www.wilsoncombat.com/a_beavertail_safeties_di.asp

In Omaha you can use  http://www.conditionone.us/
Logged
Machinegun owners blow thier load with one pull of the trigger

Offline Ry45

  • Forum Member
  • *
  • Join Date: Sep 2009
  • Posts: 9
Re: 1911 work... gunsmiths?
« Reply #9 on: January 10, 2010, 05:02:31 AM »
Hey really appreciate all the info and replies you guys have given me! I'll have to shop around and figure out who I want to send my 1911 to.... oh and get together the cash for it to :P

Thanks fellas!
Logged

Offline farmrboy

  • Got Zombies?
  • NFOA Full Member
  • **
  • Join Date: Oct 2009
  • Location: Western, NE
  • Posts: 9
  • Farmrboy
Re: 1911 work... gunsmiths?
« Reply #10 on: January 10, 2010, 10:15:32 AM »
Some grip safeties drop in without any fitting, depends on what you get and your gun. Bob Marvel moved his shop to Cortland or Hallam, don't remember (www.bobmarvelcustomguns.com). He does great work. Frerking Custom Works in Cortland can do it too. (www.fewguns.com) They run a complete machine shop and can do about anything you want.
Logged
NRA life member,  reloader since 1980, bullet caster since 2012, on Facebook- senior admin Reloading the Hornady Way, admin-The Reloading Room, Cast Bullets and Bullet Casting, NRA, Reloading Mentors North America

Offline JimP

  • Steel Benefactor
  • *
  • Join Date: Oct 2007
  • Posts: 1310
Re: 1911 work... gunsmiths?
« Reply #11 on: January 12, 2010, 05:02:13 PM »
Fred Ragle (at Omaha Gun & Machine, 8330 1/2 Western Ave.) tinkers with 1911's a bit.
Logged
The Right to Keep and BEAR Arms is enshrined explicitly in both our State and Federal Constitutions, yet most of us are afraid to actually excercise that Right, for very good reason: there is a good chance of being arrested........ and  THAT is a damned shame.  III.

Offline bullit

  • NFOA Full Member
  • **
  • Join Date: Feb 2009
  • Posts: 2143
Re: 1911 work... gunsmiths?
« Reply #12 on: January 13, 2010, 07:46:41 AM »
"tinkers" and 1911s don't mix well.  :)
Logged

Offline Ry45

  • Forum Member
  • *
  • Join Date: Sep 2009
  • Posts: 9
Re: 1911 work... gunsmiths?
« Reply #13 on: January 13, 2010, 05:59:37 PM »
Quote from: JimP on January 12, 2010, 05:02:13 PM
Fred Ragle (at Omaha Gun & Machine, 8330 1/2 Western Ave.) tinkers with 1911's a bit.

Anyone got any personal experience with Fred ragle?
I took a look at conditionone, my god does he do some nice work!
Logged

Offline JimP

  • Steel Benefactor
  • *
  • Join Date: Oct 2007
  • Posts: 1310
Re: 1911 work... gunsmiths?
« Reply #14 on: January 13, 2010, 08:10:56 PM »
Quote from: Ry45 on January 13, 2010, 05:59:37 PM
Quote from: JimP on January 12, 2010, 05:02:13 PM
Fred Ragle (at Omaha Gun & Machine, 8330 1/2 Western Ave.) tinkers with 1911's a bit.

Anyone got any personal experience with Fred ragle?
I took a look at conditionone, my god does he do some nice work!

"conditionone" ??????

Fred has done some work for me, but not on a 1911:

http://www.nebraskafirepower.com/forum/index.php?topic=1410.0
Logged
The Right to Keep and BEAR Arms is enshrined explicitly in both our State and Federal Constitutions, yet most of us are afraid to actually excercise that Right, for very good reason: there is a good chance of being arrested........ and  THAT is a damned shame.  III.

Offline rluening

  • NFOA Full Member
  • **
  • Join Date: Dec 2008
  • Posts: 123
Re: 1911 work... gunsmiths?
« Reply #15 on: January 13, 2010, 10:28:08 PM »
And to followup on the thread JimP linked - I had a Ruger MkII threaded by Gun & Machine. Fred does good work at a fair price. I have no idea what he knows about working on a 1911, but he seemed honest to me.

/rl
Logged

Offline Ry45

  • Forum Member
  • *
  • Join Date: Sep 2009
  • Posts: 9
Re: 1911 work... gunsmiths?
« Reply #16 on: January 15, 2010, 04:49:24 AM »
Quote from: JimP on January 13, 2010, 08:10:56 PM
Quote from: Ry45 on January 13, 2010, 05:59:37 PM
Quote from: JimP on January 12, 2010, 05:02:13 PM
Fred Ragle (at Omaha Gun & Machine, 8330 1/2 Western Ave.) tinkers with 1911's a bit.

Anyone got any personal experience with Fred ragle?
I took a look at conditionone, my god does he do some nice work!

"conditionone" ??????

Fred has done some work for me, but not on a 1911:

http://www.nebraskafirepower.com/forum/index.php?topic=1410.0

Here is the website for condition one, um Dave erickson I believe is his name.
http://www.conditionone.us/

Someone mentioned him in here.
Logged

Offline Wymore Wrangler

  • NFOA Full Member
  • **
  • Join Date: Jan 2009
  • Posts: 251
Re: 1911 work... gunsmiths?
« Reply #17 on: January 18, 2010, 09:36:42 PM »
Quote from: Dan W on January 07, 2010, 03:59:44 PM
Cylinder and Slide is very good and very pricey.

Another option would be to look up Travis Frerking in Cortland NE,  just outside of Lincoln

http://www.fcwguns.com/

Sorry Dan, I have to stand up and shout do not let Travis Ferking work on your gun, he screwed up a simple installation of a Millet rear sight on my Colt 1911 and wouldn't make it right, first time I've ever seen a sight fall on the floor when the tension screws were loosened by Travis.  I should have seen it coming, I asked him to do several things for me which a gunsmith should know how to do and he refused, said he didn't know how.  I had to finally send it to Lonnie at Run-N-Iron, it was a pretty simple fix for a compentent gunsmith.  Travis might be pretty good at screwing parts on AR's and running a lathe, but he's not in the league of Bill Laughridge at Cylinder and Slide, or Lonnie at Run-N-Iron. 
Logged

Offline Dan W

  • NFOA Co-Founder
  • *****
  • Join Date: Oct 2007
  • Location: Lincoln NE
  • Posts: 8143
Re: 1911 work... gunsmiths?
« Reply #18 on: January 18, 2010, 10:54:01 PM »
Sorry, I was only mentioning that Frerking worked on 1911's based on hearsay... I have never had any work done by him.

 
Logged
Dan W    NFOA Co Founder
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.   J. F. K.

Offline FarmerRick

  • NFOA Co-Founder
  • *****
  • Join Date: Mar 2008
  • Location: Valley, NE
  • Posts: 3250
  • Antagonist of liberals, anti-hunters & hoplophobes
Re: 1911 work... gunsmiths?
« Reply #19 on: January 19, 2010, 06:17:59 AM »
I have also heard bad things about Travis via ARFCOM and at area gunshows, but have no personal experience with him.
Logged
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.
Pages: [1]   Go Up
« previous next »