< Back to the Main Site
« previous next »
Pages: [1]   Go Down

Author Topic: AR-15 Drop-in Trigger Adjustement  (Read 3913 times)

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
AR-15 Drop-in Trigger Adjustement
« on: February 22, 2012, 12:31:21 AM »
Been surfing the web and found some comments about an AR-15 Drop-in Trigger Adjuster...

http://weww.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2063387&page=1

http://www.brownells.com/.aspx/pid=307/sku=072-000-001/Product/AR-15-Drop-In-Trigger-Adjuster


Found a thread on ARFCOM discussing essentially the same thing...

http://www.ar15.com/forums/t_3_4/457823_Trigger_Wow__RANGE_REPORT.html


First, let me say, yes I am going to be careful.  And I know that I can just buy a 2-stage drop in trigger, but I thought I would give this a try first.  If it doesn't get me close to what I'm looking for, then I'm only out $20. 

The AR15.com link is occasionally a heated discussion about this adjustment, but the guy doing the mod has put several thousand rounds through the gun without a problem.  I will give a report when/if I use it in my rifle.

Fly


Logged
Si vis pacem, para bellum

Offline JimP

  • Steel Benefactor
  • *
  • Join Date: Oct 2007
  • Posts: 1310
Re: AR-15 Drop-in Trigger Adjustement
« Reply #1 on: February 22, 2012, 12:53:31 AM »
Quote
but the guy doing the mod has put several thousand rounds through the gun without a problem.

That's what he said online.... MUHUUUUUUHAAAHAAAH!
Logged
The Right to Keep and BEAR Arms is enshrined explicitly in both our State and Federal Constitutions, yet most of us are afraid to actually excercise that Right, for very good reason: there is a good chance of being arrested........ and  THAT is a damned shame.  III.

Offline Dan W

  • NFOA Co-Founder
  • *****
  • Join Date: Oct 2007
  • Location: Lincoln NE
  • Posts: 8143
Re: AR-15 Drop-in Trigger Adjustement
« Reply #2 on: February 22, 2012, 07:26:47 AM »
I have done that mod with all my stock triggers, but I won't pay that much for a screw job...  So I have done a WECSOG method
Logged
Dan W    NFOA Co Founder
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.   J. F. K.

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: AR-15 Drop-in Trigger Adjustement
« Reply #3 on: February 22, 2012, 10:44:27 AM »
Found an animation from Bushmaster showing how the standard AR-15 trigger, sear, hammer, and disconnect work.  Pretty cool...

http://www.bushmaster.com/anatomy_bushmaster.asp

Fly
Logged
Si vis pacem, para bellum

Offline metaldoc

  • Powder Benefactor
  • *
  • Join Date: Jan 2011
  • Posts: 284
Re: AR-15 Drop-in Trigger Adjustement
« Reply #4 on: February 22, 2012, 10:50:01 AM »
I love those kinds of animations.  Good find!
Logged

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: AR-15 Drop-in Trigger Adjustement
« Reply #5 on: February 22, 2012, 11:00:39 AM »
I sent an email to PR361 who started the AR15.com thread above.  Here was his reply...

Quote
I still am shooting that same trigger in my one and only Armalite. It has not been touched since the day it was installed, except to add grease when I clean the rifle. It has never been back out and I have had zero issues.

Also, I've done that trigger fro a dozen friends, and not one issue so far. I think the concerns about damaging the case hardening are over rated. My rifle probably has 2500-3000 rounds through it now. If the trigger starts to give me trouble, I'll invest another $35 and do it over. It's working great, breaks consistantly at 4 lbs on my Lyman electronic trigger guage. Just shot it last week, check out the attached target.

Good Luck,

Fly
Logged
Si vis pacem, para bellum

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: AR-15 Drop-in Trigger Adjustement
« Reply #6 on: February 22, 2012, 11:18:14 AM »
I've been meaning to try this.  The stock trigger on my 18" rifle is definitely hurting my group sizes.  For 3 gun it's not a big deal, but for precision shooting it would help.
Logged

Offline SeanN

  • NFOA Full Member
  • **
  • Join Date: Jul 2009
  • Location: Omaha, NE
  • Posts: 535
Re: AR-15 Drop-in Trigger Adjustement
« Reply #7 on: February 23, 2012, 11:43:30 AM »
Let us know how it works for you. I'm not a fan of these kinds of modifications but I am a curious guy. ;)
Logged

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: AR-15 Drop-in Trigger Adjustement
« Reply #8 on: February 23, 2012, 04:38:37 PM »
I'm generally not either, but if it's sealed in with loctite I don't see it causing a problem.
Logged

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: AR-15 Drop-in Trigger Adjustement
« Reply #9 on: February 23, 2012, 06:28:50 PM »
Quote from: bkoenig on February 23, 2012, 04:38:37 PM
I'm generally not either, but if it's sealed in with loctite I don't see it causing a problem.

I'm not an engineer, but I have stayed in a Holiday Inn Express.  If the set screw were to move, I would think it would move towards the original position (no partial trigger pull).  In other words, the trigger is constantly being pushed down in the back due to the trigger spring.  So I think loctite would be necessary to maintain your partially pulled trigger setting, but failure of the loctite should just mean that your trigger slowly goes back to the original l-o-n-g h-a-r-d pull.

Fly
Logged
Si vis pacem, para bellum

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: AR-15 Drop-in Trigger Adjustement
« Reply #10 on: April 17, 2012, 10:04:46 PM »
I received the drop in trigger adjuster and it is installed.  Except for finding a LONG small size allen wrench, it was a simple job.  I used a friend's scale to check the weight of trigger pull before and after installation.  With or without the adjuster, the trigger pull is right at 7 1/2 pounds.  So no change there.  Regarding the length of pull...it does feel considerably shorter, but I'm trying to figure out a way to measure that.  Anyone have an idea? 

When I first installed the adjuster, I had screwed in the adjuster too far.  It made the trigger pull very short and crisp, but the safety would not engage.  After backing out the screw 1/4 turn at a time and then re-installing the pistol grip screw, I finally got it to a point where the safety will engage.  The adjuster has taken out what appears to be a noticeable amount of trigger pull length.  I think if I lightly (yes...VERY lightly) buff the sear, etc. it may make it quite smooth.  My friend who shoots and does quite well in the high power matches with his target AR-15 said he was surprised at how good my stock trigger feels after the mod. 

I have also considered cutting a small notch in the disconnector to allow the adjustment screw to push the disconnector a little further up.  I have also been thinking about a slight modification to the springs to make the trigger pull a little lighter.  If I botch up the springs and/or disconnector, they are not very costly to replace.

Fly
Logged
Si vis pacem, para bellum

Offline Dan W

  • NFOA Co-Founder
  • *****
  • Join Date: Oct 2007
  • Location: Lincoln NE
  • Posts: 8143
Re: AR-15 Drop-in Trigger Adjustement
« Reply #11 on: April 17, 2012, 10:23:10 PM »
Don't mess with the disconnector

The issue you are dealing with is called "creep" and is addressed by modifying the hook on the hammer




or by grinding a bit off the tail of the trigger so you can remove  more creep with your special adjuster without jamming the safety
Logged
Dan W    NFOA Co Founder
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.   J. F. K.

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: AR-15 Drop-in Trigger Adjustement
« Reply #12 on: April 17, 2012, 10:52:12 PM »
Quote from: Dan W on April 17, 2012, 10:23:10 PM
Don't mess with the disconnector

The issue you are dealing with is called "creep" and is addressed by modifying the hook on the hammer

or by grinding a bit off the tail of the trigger so you can remove  more creep with your special adjuster without jamming the safety

Hmmm...I like that idea.

Fly
Logged
Si vis pacem, para bellum

Offline 00BUCK

  • Powder Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Bellevue
  • Posts: 510
Re: AR-15 Drop-in Trigger Adjustement
« Reply #13 on: April 18, 2012, 01:34:34 AM »
AGP lowers come with a built in creep screw forward of the pistol grip screw hole. You access the screw between the trigger guard and the pistol grip, so adjustment is easy and you don't need to take your lower apart to adjust it.
Logged

Offline OnTheFly

  • Steel Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Lincoln, NE
  • Posts: 2617
  • NFOA member #364
Re: AR-15 Drop-in Trigger Adjustement
« Reply #14 on: April 18, 2012, 11:26:31 PM »
Quote from: 00BUCK on April 18, 2012, 01:34:34 AM
AGP lowers come with a built in creep screw forward of the pistol grip screw hole. You access the screw between the trigger guard and the pistol grip, so adjustment is easy and you don't need to take your lower apart to adjust it.

The only thing you may have to do with the grip screw adjuster, if you can't find an allen wrench long enough, is to remove the grip screw a few times until you have it adjusted correctly.  But even that can be a little bit of a pain in the posterior.

Fly
« Last Edit: April 21, 2012, 01:23:54 AM by OnTheFly »
Logged
Si vis pacem, para bellum

Offline lneuke

  • NFOA Full Member
  • **
  • Join Date: Mar 2012
  • Location: Waverly
  • Posts: 124
Re: AR-15 Drop-in Trigger Adjustement
« Reply #15 on: April 22, 2012, 11:28:29 AM »
I work as a toolmaker and made one of these trigger adjusters myself, and I had the exact same result as OnTheFly.  It didn't reduce the trigger pull weight, but it did take some of the slack out of the trigger.  I also had a little trouble with the safety clearance, as well as the disconnector not engaging properly when the adjustment was cranked a little too far.  After messing around with it a while, I got it to where it works fairly well.  Comparing it to my friend's stock DPMS Oracle, you can notice a slight improvement. 

However...I honestly wouldn't have done the modification if I had to buy the components.  Luckily I was able to do this modification for free, just to try it out.  I would rather spend the money on an upgraded trigger system otherwise.  Although you can notice an improvement, it's not very much, and if you want the best results from this you're probably going to have to modify some of your hammer components (if you know what you're doing).
Logged
Pages: [1]   Go Up
« previous next »