< Back to the Main Site

Author Topic: Where to get Components?  (Read 6535 times)

Offline pfinn

  • Forum Member
  • *
  • Join Date: Jan 2012
  • Posts: 70
Where to get Components?
« on: January 27, 2013, 08:26:06 PM »
I am curious if any of you know of anywhere that has components in stock. Looking for mainly for bullets (.223, .40 S&W, .45 ACP). It seems like everywhere is pretty well sold out of bullets and brass. I've checked CTD, Midway, Brownell's, and Cabela's and Scheel's locally.

I am guessing everything is cleaned out, but thought I'd check.

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Where to get Components?
« Reply #1 on: January 27, 2013, 08:36:11 PM »
Reloading components are like hen's teeth right now. 

Offline dkarp

  • NFOA Full Member
  • **
  • Join Date: Mar 2011
  • Posts: 91
Re: Where to get Components?
« Reply #2 on: January 27, 2013, 09:03:50 PM »
Scheels in Lincoln had some Berry plated .45 ACP today, not much of anything else.

Offline SS_N_NE

  • NFOA Full Member
  • **
  • Join Date: Feb 2012
  • Posts: 429
Re: Where to get Components?
« Reply #3 on: January 27, 2013, 10:28:40 PM »
I though it was bad last year. Now it is REAL bad and stupid high cost!

It was amusing seeing selves of .223 empty in every imaginable type store that sold ammunition (and I have done a bit of traveling lately...it is everywhere).  Then there was a bit of panic when I needed some factory loaded 9mm or .45 for a CCW class. Now the loading components are getting harder to find. Disappears in volume when it shows up. And prices keep climbing. Damn "supply and demand" economics thing.

Offline Neeco

  • It is what it isn't...
  • Steel Benefactor
  • *
  • Join Date: Oct 2012
  • Location: Waverly
  • Posts: 237
Re: Where to get Components?
« Reply #4 on: January 28, 2013, 06:15:33 AM »
I am curious if any of you know of anywhere that has components in stock. Looking for mainly for bullets (.223, .40 S&W, .45 ACP). It seems like everywhere is pretty well sold out of bullets and brass. I've checked CTD, Midway, Brownell's, and Cabela's and Scheel's locally.

I am guessing everything is cleaned out, but thought I'd check.

Since no one seems to answer our types of questions, I will try and help with what I have found:
Midway had Rainer LeadFree 115gr FMJ bullets last night fairly cheap.  I picked up 500 just so I can start reloading.
Guns Unlimited had WSP/WSR primers in stock Sat afternoon.
Scheels in Lincoln had A selection of Powders Friday as well as some .223 from American Eagle on the shelf for 7.99.

Hope this helps.

Offline pfinn

  • Forum Member
  • *
  • Join Date: Jan 2012
  • Posts: 70
Re: Where to get Components?
« Reply #5 on: January 28, 2013, 07:24:15 AM »
Thanks all. I'm amazed every time I go into a store how empty the shelves are... I'll be curious how long it stays this way.

Neeco -- The American Eagle was gone by opening on Saturday AM, but they had replaced it with Independence 5.56 for $10.99.

Offline Mudnrox

  • Powder Benefactor
  • *
  • Join Date: May 2012
  • Posts: 128
Re: Where to get Components?
« Reply #6 on: January 28, 2013, 12:57:23 PM »
I was at Cabelas today.  They had some 45 ACP bullets, but no 230 grain round nose.
They also had some .223, .45, and 9mm dies

Offline Neeco

  • It is what it isn't...
  • Steel Benefactor
  • *
  • Join Date: Oct 2012
  • Location: Waverly
  • Posts: 237
Re: Where to get Components?
« Reply #7 on: January 28, 2013, 01:22:24 PM »
I was at Cabelas today.  They had some 45 ACP bullets, but no 230 grain round nose.
They also had some .223, .45, and 9mm dies

They didn't have any yesterday.  Dang.

Offline pfinn

  • Forum Member
  • *
  • Join Date: Jan 2012
  • Posts: 70
Re: Where to get Components?
« Reply #8 on: January 28, 2013, 02:33:45 PM »
Stopped at Walmart on 84th in Lincoln over lunch. They had a bunch of PPU .223 ammo for $7.99.

Offline unfy

  • Lead Benefactor
  • **
  • Join Date: Jun 2010
  • Location: TN (was La Vista, NE)
  • Posts: 1830
  • !!! SCIENCE !!!
Re: Where to get Components?
« Reply #9 on: January 28, 2013, 03:45:11 PM »
pfin:

Components!  Bulelts, brass, primers, powder, etc... not loaded ammo.

Granted, loaded ammo does get you some brass....
hoppe's #9 is not the end all be all woman catching pheramone people make it out to be ... cause i smell of it 2 or 3 times a week but remain single  >:D

Offline gigabelly

  • Steel Benefactor
  • *
  • Join Date: Nov 2010
  • Location: Right behind you!
  • Posts: 216
  • KD0RTI
Re: Where to get Components?
« Reply #10 on: January 28, 2013, 05:07:13 PM »
Scheels had Hornady 223 dies. 30-06 as well.  Now all I need is the 40. and I am set on dies.  They had 9mm but I don't use it, so left it for someone else.  Now I need the plates and a class to teach me how to use all this expensive stuff so I can start the journey towards breaking even.
Government is not the solution to our problems, Government is our problem. -Ronald Reagan

Offline pfinn

  • Forum Member
  • *
  • Join Date: Jan 2012
  • Posts: 70
Re: Where to get Components?
« Reply #11 on: January 28, 2013, 05:43:30 PM »
Unfy, yes, I flipped there. Original post was about components... just seeing loaded ammo somewhere got me so giddy, I had to tell somebody.

Offline Neeco

  • It is what it isn't...
  • Steel Benefactor
  • *
  • Join Date: Oct 2012
  • Location: Waverly
  • Posts: 237
Re: Where to get Components?
« Reply #12 on: January 29, 2013, 01:24:45 PM »
Found Powder, .223 60gr bullets and 9mm and .223 dies at Sheels in Lincoln

Offline gigabelly

  • Steel Benefactor
  • *
  • Join Date: Nov 2010
  • Location: Right behind you!
  • Posts: 216
  • KD0RTI
Re: Where to get Components?
« Reply #13 on: January 29, 2013, 01:50:47 PM »
Found the 223 dies and 30-06 dies at Scheels in Lincoln also.  No primers or case holders for any of the calibers I need.  The hunt continues.

BTW, WalMart carries no reloading gear at all.  Everyone probably knows that already, and I just learned it today, so I thought I would share.

Government is not the solution to our problems, Government is our problem. -Ronald Reagan

Offline 00BUCK

  • Powder Benefactor
  • *
  • Join Date: Mar 2009
  • Location: Bellevue
  • Posts: 510
Re: Where to get Components?
« Reply #14 on: January 29, 2013, 02:45:33 PM »
Found the 223 dies and 30-06 dies at Scheels in Lincoln also.  No primers or case holders for any of the calibers I need.  The hunt continues.

BTW, WalMart carries no reloading gear at all.  Everyone probably knows that already, and I just learned it today, so I thought I would share.


Some "rural" Walmarts do. I've seen powder and primers at stores in North Platte and Alamosa, CO.

Offline PhilK

  • NFOA Full Member
  • **
  • Join Date: Dec 2008
  • Posts: 42
  • xxx
Re: Where to get Components?
« Reply #15 on: February 01, 2013, 07:13:30 AM »
Montana Gold Bullet has .40 and .45 projectiles in stock today (02/01).

https://www.montanagoldbullet.com/pricelist.html

Offline Phantom

  • NFOA Full Member
  • **
  • Join Date: Feb 2012
  • Location: Omaha/Bellevue
  • Posts: 503
Re: Where to get Components?
« Reply #16 on: February 01, 2013, 10:29:02 AM »
Too Bad Hornady doesn't have a Factory outlet Store.  :(
"If the primates that we came from had known that someday politicians would come out of the...the gene pool, they'd a stayed up in the trees and written evolution off as a bad idea.....Hell, I always thought the opposable thumb was overrated.  "-- Sheridan, "Babylon 5"

Offline Mudnrox

  • Powder Benefactor
  • *
  • Join Date: May 2012
  • Posts: 128
Re: Where to get Components?
« Reply #17 on: February 01, 2013, 09:23:22 PM »
Discount Enterprises Guns has bullets.  I saw .45 ACP, 308 Win and others today.

Cabelas in LaVista also has some Berrys Bullets 115 gr 9mm and 230 grain .45 ACP

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Where to get Components?
« Reply #18 on: February 02, 2013, 07:53:33 AM »
http://www.powdervalleyinc.com/ has some powder and bullets in stock but like most online vendors they're way behind in shipping.  Ordering in bulk is the way to go if you can get a few guys together to split Hazmat & shipping.

I might be interested in a group buy if anyone tracks down some small pistol primers or Ramshot TAC.

Offline pfinn

  • Forum Member
  • *
  • Join Date: Jan 2012
  • Posts: 70
Re: Where to get Components?
« Reply #19 on: February 03, 2013, 08:27:21 PM »
Montana Gold Bullet has .40 and .45 projectiles in stock today (02/01).

https://www.montanagoldbullet.com/pricelist.html

Thanks for the lead here, looked into them and ordered two boxes. Good prices, and they seem to get good reviews.