Author Topic: Tactical Reloading Closet... (Read 3047 times)

gsd · « **on:** February 08, 2013, 06:24:02 PM »

i had nowhere else to go with the table...

anyway, i think i got most of what i will need to start reloading, it stung a bit.

Thought I would share my "hidden" setup. If you experienced fellers see somethign i don't have and think i need, let me know thanks, I am newer to this than...well, nevermind.

Ronvandyn · « **Reply #1 on:** February 08, 2013, 06:25:42 PM »

Scale?

Ron

gsd · « **Reply #2 on:** February 08, 2013, 06:27:06 PM »

Little black pouch next to the gloves and powder.

Ronvandyn · « **Reply #3 on:** February 08, 2013, 06:35:49 PM »

Quote from: gsd on February 08, 2013, 06:27:06 PM

Little black pouch next to the gloves and powder.

Hiding things are we ? Smart...

Might want to think about case prep tools as well. Eventually you are going to need to core out primer holes or trim brass. They are usually a "down the road" kind of thing for a new reloader, but if you can get them sooner rather than later you will have them when needed.

Ron

A-FIXER · « **Reply #4 on:** February 08, 2013, 06:51:11 PM »

Tumbler for cleaning brass
trimmer shorten brass
FL Dies for semi-auto cal's
NS Dies for bolt cal's
Powder drop setup

gsd · « **Reply #5 on:** February 08, 2013, 06:51:46 PM »

thanks ron, i was looking at deburring tools and primer pockets tools today, actually. Case trimmers are a bit further down the line at the moment, my bank account isn't happy with me right now thanks to buying a new car.

unfy · « **Reply #6 on:** February 08, 2013, 07:05:58 PM »

Assuming you've got a lot of lighting for your closet... interesting heh.

With all the stuff I do, a closet wouldn't be nearly enough space

.

I... should... possibly get a picture taken of something I do with some of my single stage stuff.

Instead of perma-attaching it to the bench, I attach it to a 1x4 and then use some quick clamps to anchor it on the bench. This lets me move it out of the way when not using it, etc.

So far, works fine with the little lee C shaped $30 press that someone was very kind in gifting to me. Also works with a powder drop / measure nicely as well.

Granted, I've since added to the lil lee press's holder to handle primer drops... but that has to wait for pics until after Monday's clinic.

Phantom · « **Reply #7 on:** February 08, 2013, 08:40:29 PM »

Quote from: gsd on February 08, 2013, 06:27:06 PM

Little black pouch next to the gloves and powder.

Won't that get you busted for being a Closet Drug dealer if you ever get Raided ?

Let's... see...Humm Guns, Little Black pouch, Scales, Power, funnel, Baggies...all hidden in the closet .....(didn't they do this on Breaking Bad?

A-FIXER · « **Reply #8 on:** February 08, 2013, 08:59:51 PM »

trickler

unfy · « **Reply #9 on:** February 08, 2013, 09:13:44 PM »

Quote from: A-FIXER on February 08, 2013, 08:59:51 PM

trickler

Given his powder choice in the pic, he's prolly got a spare 223 case he can use as a powder trickler

gsd · « **Reply #10 on:** February 08, 2013, 10:03:14 PM »

The bedroom light is actually right outside the closet door, so yes, plenty of light. Since I am learning, my first 10 rounds just got finished, and yes, it took an hour to do 10 rounds lol.

The press came with a small scoop type thing that works pretty good if you dont hurry.

I'm all proud of myself right now lol. When it goes bang can say I did it

Dan W · « **Reply #11 on:** February 08, 2013, 10:07:57 PM »

I have a Lee perfect powder measure that you can have if you want

gsd · « **Reply #12 on:** February 09, 2013, 07:08:01 AM »

That would be awesome Dan, thank you!

bkoenig · « **Reply #13 on:** February 09, 2013, 07:55:15 AM »

Good job! Just remember, always start low and work your way up. Learn how to read your brass for pressure signs.

gsd · « **Reply #14 on:** February 09, 2013, 07:59:27 AM »

I spent more time mic'ing the cases than i did loading lol, i got my hands on the Sierra Load Pages for 308, with specs.

unfy · « **Reply #15 on:** February 09, 2013, 05:58:44 PM »

BTW, only real gripe I have - two bottles of powder on the table at a time. A pedantic no-no. The not in use bottle should be put out of reach and out of eye sight when it comes to actually loading.

Randy · « **Reply #16 on:** February 09, 2013, 06:14:20 PM »

Good point on the powder.

Thank You

Randy

Neeco · « **Reply #17 on:** February 09, 2013, 06:35:57 PM »

My not-so-tactical bench.

unfy · « **Reply #18 on:** February 09, 2013, 06:38:28 PM »

Quote from: Neeco on February 09, 2013, 06:35:57 PM

My not-so-tactical bench.

Pedantic again, more separation between primers and powder. Opposite ends of the double shelving would be nice

Neeco · « **Reply #19 on:** February 09, 2013, 07:13:00 PM »

Quote from: unfy on February 09, 2013, 06:38:28 PM

Pedantic again, more separation between primers and powder. Opposite ends of the double shelving would be nice

Ha, you didn't say anything when they were stuffed into that box this afternoon! They were certainly much much closer then... touching even!

Again, great to get the face to face!

:-)