< Back to the Main Site

Author Topic: Lever Guns  (Read 2242 times)

Offline landon410

  • NFOA Full Member
  • **
  • Join Date: Jan 2014
  • Location: Omaha
  • Posts: 380
Lever Guns
« on: February 19, 2014, 09:20:44 AM »
Anyone here into lever guns?
what do you shoot? done any work to it?

I still don't understand why they've fallen out of favor with the average hunter, what can a bolt action 308 or 3006 do that a good shot from a 3030 35 rem 4570 etc do on an average hunt in nebraska missouri etc?
inside 100 yards with quicker follow shot, I just like my lever gun.

I shoot a Marlin 338MX, 200 grain round going over 2500 FPS it really smacks whatever it hits, have been at that 1.5 MOA area with it, running a redfield revolution scope on it, I know I know, scope on a levergun....
I have taken a deer at 180 yards with this setup in solider creek outside Chadron

attach picture is a doe from this past season, northwest missouri, 50 ish yard shot, DRT

What lever guns do you shoot? What type of game have you taken with it?

Offline Husker_Fan

  • NFOA Full Member
  • **
  • Join Date: Apr 2010
  • Location: Omaha
  • Posts: 717
Re: Lever Guns
« Reply #1 on: February 19, 2014, 10:07:27 AM »
I grew up with bolt actions and have just stuck with them. I have a hankering for a .357 1894c. I think that would be a lot of fun.

Offline shooter

  • NFOA Full Member
  • **
  • Join Date: Aug 2013
  • Location: near Yutan
  • Posts: 1630
Re: Lever Guns
« Reply #2 on: February 19, 2014, 10:46:32 AM »
I got a marlin guide gun stainless ported in 45-70, and just picked up a marlin 30-30 at the fremont gun show, its a micro groove barrel and not sure how good its gonna shoot cast bullets,

  I am looking for lever guns in .357, 44 mag, and 45 colt,  something for the grandkids to shoot,
Was mich nicht umbringt macht mich stärker
Sic semper evello mortem tyrannis
 NRA Endowment member
  Shoot  them in the crotch.  Clint Smith, thunder ranch.  Oct 14, 2016

Offline NE Bull

  • 2011 NFOA Firearm Rights Champion Award winner
  • NFOA Full Member
  • **
  • Join Date: Nov 2008
  • Location: Lincoln, NE
  • Posts: 3501
    • A "friend's" blog
Re: Lever Guns
« Reply #3 on: February 19, 2014, 04:13:16 PM »
Marlin 336T .30-30 Williams peeps. 
“It is not an issue of being afraid, It's an issue of not being afraid to protect myself.”
 Omaha Mayor Jean Stothert
 "A gun is a tool, Marian; no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that."  Shane

Offline bkoenig

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: May 2009
  • Location: Lincoln, NE
  • Posts: 3677
  • Aspiring cranky old gun nut
Re: Lever Guns
« Reply #4 on: February 19, 2014, 06:30:37 PM »
I have an old 60's era Marlin 336 Saddle Ring Carbine that has been rebored from 30-30 to 38-55.  It has a lot of external wear and the finish is turning to patina but the action and trigger are slick as snot from years of use.  It's not a tack diver by any means (few lever guns really are) but with a Williams peep sight it's more accurate than I can hold shooting offhand.  Lever guns are meant to be shot standing on your hind legs like a man, not from the bench.  :)

It's also extremely short and light.  The 38-55 isn't a real long range round but it packs enough of a wallop that I think it could take down anything in North America short of Grizzly.  If I had to hump any of my rifles over mountains and I didn't need anything beyond 200 yards effective range I would pick this one.  I've only had it about a year but I took a medium size buck with it last fall.

I would really like a 45-70 lever action some day to complement my Sharps.  I'm partial to Marlins, but anything built after Remington bought them out is suspect in the quality department.  Pre-Remington models go for a premium these days.  I have heard the newest ones have gotten a lot better, though.
« Last Edit: February 19, 2014, 06:43:25 PM by bkoenig »

Offline Ronvandyn

  • Pollywog
  • Powder Benefactor
  • *
  • Join Date: Sep 2009
  • Location: Bellevue NE
  • Posts: 561
Re: Lever Guns
« Reply #5 on: February 19, 2014, 06:43:58 PM »
I love a lever action, being an ambidextrous shooter as I am (Left eye dominant).  I gave away my Marlin 336 in 30-30 years ago to a very good friend, and I have regretted it ever since.  Today the only lever action I have is a Ruger #1 in .223.  I have occasionally looked for Marlins or Winchesters in 44-40, 30-30, or 44mag, but they seem pretty hard to come by.  I have a bud (who is also a member here) who has what his father calls a "Golden Boy" chambered to 44-40 and I love shooting that, and if he ever turns his back....  Anyway, I love the things, they are great for us right handed folks who have eye issues.

Ron
NE-CHP Holder, USAF Veteran, NRA Member,  ENGC Member
KC0MXX

Offline NE Bull

  • 2011 NFOA Firearm Rights Champion Award winner
  • NFOA Full Member
  • **
  • Join Date: Nov 2008
  • Location: Lincoln, NE
  • Posts: 3501
    • A "friend's" blog
Re: Lever Guns
« Reply #6 on: February 19, 2014, 10:05:47 PM »
I love a lever action, being an ambidextrous shooter as I am (Left eye dominant).  I gave away my Marlin 336 in 30-30 years ago to a very good friend, and I have regretted it ever since.  Today the only lever action I have is a Ruger #1 in .223.  I have occasionally looked for Marlins or Winchesters in 44-40, 30-30, or 44mag, but they seem pretty hard to come by.  I have a bud (who is also a member here) who has what his father calls a "Golden Boy" chambered to 44-40 and I love shooting that, and if he ever turns his back....  Anyway, I love the things, they are great for us right handed folks who have eye issues.

Ron

Some options- Henry has a new .30-30 out that is danged sexy and comes factory with XS Ghost Rings sights.  http://henryrepeating.com/rifle-3030.cfm  Love the Golden Boy, but WOW them brass receivers are heavy! but PURTY!
And don't over look Rossi for a lever gun. Folks are using these in SASS and holding up just fine.  ( and if there is to be a group that abuses lever guns- it would be them weekend cowboys!)
Cruise sites like SASS Wire and Marlinowners.net (org?) great resources and lots of buy/sale/trade goings on.
Also check out Skinner Sights. http://www.skinnersights.com/ for your lever gun peeps.  (Sorry, but for me, lever guns and peep sights/tang sights go together like peas and carrots)
« Last Edit: February 19, 2014, 10:13:34 PM by NE Bull »
“It is not an issue of being afraid, It's an issue of not being afraid to protect myself.”
 Omaha Mayor Jean Stothert
 "A gun is a tool, Marian; no better or no worse than any other tool: an axe, a shovel or anything. A gun is as good or as bad as the man using it. Remember that."  Shane

Offline Wildgoose

  • Gun Show Volunteer
  • NFOA Full Member
  • **
  • Join Date: Nov 2008
  • Posts: 304
Re: Lever Guns
« Reply #7 on: February 19, 2014, 11:38:43 PM »
Hi landon410,
I have three levers and reload for all of them. Winchester 95' in 405WCF,Marlins in 45-70 and 35Rem. The 35Rem is an older rifle with Ballard rifling. I shoot both cast and jacketed in all three depending on what I am up to. I have taken several deer with the 405 and the 45-70. I shoot the 35Rem in cowboy lever action silhouette. The 45-70 is a Guide Gun stainless and its scoped. The 35Rem is a 336 and has Williams receiver peep sights. The 95' 405 has been fitted with a Lyman tang peep set up. All three will group under 3 moa off the bench. Oh yea, don't worry that micro-groove will handle cast bullets just fine.

 

Offline landon410

  • NFOA Full Member
  • **
  • Join Date: Jan 2014
  • Location: Omaha
  • Posts: 380
Re: Lever Guns
« Reply #8 on: February 20, 2014, 08:20:11 AM »
that stainless guide gun is really pretty, I like that it doesnt have some odd color laminate stock on it, I didn't like those grey stocks marlin used.

I also agree with what was said about quality of marlin after remington took over production, i found my 338mx in Norfolk NE and bought it, they had a couple more 92XXX serial guns with correct barrel roll and stamp to prove its a marlin and not a marlington, I posted that on the marlin owners forum and guys called up and starting trying to have them shipped. That gun shop jacked the prices on them though, kind of shady......

I really like the lever action, and wish I was a reloader, I would like to try cast rounds in it.
The problem with my gun is ammo selection, Hornady makes a 1 option for it, remington used to make a 225 or 250 gr round for it ( i dont remember which), and thats it.

Its a great hunting round though

and to the comment about lugging it over a mountian, when I went hunting in western nebraska with a buddy, we hiked a lot with large packs and when we got deer we quartered and carried it, I have my marlin and he had a older model 70, holy crap that model 70 was heavy!
« Last Edit: February 20, 2014, 08:44:35 AM by landon410 »

Offline MHicks

  • Forum Member
  • *
  • Join Date: Feb 2014
  • Posts: 28
Re: Lever Guns
« Reply #9 on: February 20, 2014, 08:27:24 AM »
I've got a few.  A Henry in .22, Marlin 336 in 30-30 and an 1895G in 45-70.  The 336 is pre-Remington and the 45-70 is post-Remington.

There are a lot of apprehensions about getting a "Remlin".  I think,  as with any firearm, if you know what you are looking for you will be fine.  Get touchy feely with it before you take it home and you will be happy.

I cast and load for the 336 and 1895.  The 336 has the micro-groove barrel and handles cast just fine.  The 1895 is certainly versatile.  Going from mild to wild.  Right now I only have a 405 grain mold for it but have been looking for a 300-350 grain mold to try with it.

Offline shooter

  • NFOA Full Member
  • **
  • Join Date: Aug 2013
  • Location: near Yutan
  • Posts: 1630
Re: Lever Guns
« Reply #10 on: February 20, 2014, 08:50:22 AM »
 another lever action I always want to try, the 9410, a nice Winchester in .410 shotgun, Ii have no idea why I want one, but its just a cute fast 410, my other .410,s are either bolt action or break open,   I don't know, maybe just having something different than everyone else
Was mich nicht umbringt macht mich stärker
Sic semper evello mortem tyrannis
 NRA Endowment member
  Shoot  them in the crotch.  Clint Smith, thunder ranch.  Oct 14, 2016

Offline RobertH

  • Gun Show Volunteer
  • Powder Benefactor
  • *
  • Join Date: Apr 2009
  • Location: Norfolk
  • Posts: 2489
Re: Lever Guns
« Reply #11 on: February 20, 2014, 01:20:25 PM »
the only lever action i show was an old, old Daisy bb gun.
Follow the NFOA on Twitter: @NFOA_Official

Offline altheman2

  • Powder Benefactor
  • *
  • Join Date: Dec 2010
  • Location: South Central NE
  • Posts: 161
Re: Lever Guns
« Reply #12 on: February 21, 2014, 09:51:13 PM »
The only lever gun I have is my savage 99. Gun holds a special place in my heart but sadly the old girl has headspace issues. Hope to get her fixed some day but a really good gunsmith is hard to find.






Offline DRech

  • NFOA Full Member
  • **
  • Join Date: Mar 2014
  • Posts: 15
Re: Lever Guns
« Reply #13 on: March 29, 2014, 03:32:24 PM »
I love the Marlins.  killed a good number of deer with 30-30's and a 35.  They are surprisingly accurate.,  as good as most of my bolt guns.   Also very much like my Winchester 94 in .356.   Its a real deer hammer. Most deer will drop as soon as I pull the trigger. But my all time favorite are Savage  99's. I have several.   I get a lot of enjoyment just looking at them and picking them up.  My biggest buck I took with a 99F in 243, although I consider a 243 light.  The vast majority of my shots are less than 100 yards.  Haven't taken a deer yet that I could not have cleanly killed with a good Marlin 30-30.  Really an under rated round.